Hello, Did you ever figure out how to manage to get the ADC or any analog instance working for the BBB from this lib?
Seth On Friday, December 11, 2020 at 7:31:49 AM UTC-6 [email protected] wrote: > Jon: > > OK, you set me on the right track. After doing all of the following: > > *sudo pip3 install Adafruit_BBIO -U* > > *sudo pip3 install adafruit_circuitpython-lis3dh* > > *sudo pip3 install adafruit-circuitpython-busdevice* > > *sudo pip3 install adafruit-circuitpython-register* > Everything is working as expected. I had already done the first two, but > I’m including them here in case anyone else comes across this. > > The instructions here: > https://learn.adafruit.com/welcome-to-circuitpython/circuitpython-libraries > are > outdated. It is not necessary (and in fact is detrimental) to copy the > busdevice and register directories from the bundle linked on that page. > > I am pretty sure it is not necessary to copy the device files from the > bundle either, it is sufficient to do: > > *sudo pip3 install adafruit-circuitpython-ds3231* > > *sudo pip3 install adafruit-circuitpython-bme680* > > *sudo pip3 install adafruit-circuitpython-bno055* > But I would want to test this on a clean installation to be 100% certain. > > Thank you, > -Steve > > > On Dec 11, 2020, at 2:10 AM, jonnymo <[email protected]> wrote: > > If you look in the board.py file you can see what boards are supported > already. This does appear to include the BB Black. > https://github.com/adafruit/Adafruit_Blinka/blob/master/src/board.py > > Jon > > On Thu, Dec 10, 2020 at 10:03 PM [email protected] <[email protected]> > wrote: > >> Here's a few other links that could help >> >> https://circuitpython.org/blinka >> ( a link to the beaglebone black (as well as others) is on that page >> https://circuitpython.org/blinka/beaglebone_black/ ) >> >> https://pypi.org/project/Adafruit-Blinka/ >> >> You probably don't need to do any porting - but insights can be gained >> here: >> https://learn.adafruit.com/adding-a-single-board-computer-to-blinka >> >> > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAG99bkoO3cipL%3DiXDotZvpqGr8ALPZwL%3D_08frC%3Dt4w4-OONxg%40mail.gmail.com > > <https://groups.google.com/d/msgid/beagleboard/CAG99bkoO3cipL%3DiXDotZvpqGr8ALPZwL%3D_08frC%3Dt4w4-OONxg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/06ce5584-026d-469e-840e-27f4ea00244fn%40googlegroups.com.
