Hi. I ran into a similar problem where I needed to put the program on the eMMC and use an SD card to store the data. But when I insert an empty SD card, the board card cannot boot the system from eMMC 在2020年12月10日星期四 UTC+8 上午5:29:17<[email protected]> 写道：
> Sorry for the off topic message, but there is a way to install > latest image on the emmc without using the sdcard ? > maybe usb or something ? > > Em qua., 9 de dez. de 2020 às 01:50, Vinicius Juvinski < > [email protected]> escreveu: > >> Hi. >> >> Is a 16GB sandisk - I tried 3 different cards. >> I powered by USB, power adapter - I have from a RP4 and a power bank too. >> >> >> In true I bought 2 from farnell and the first one the sd slot is dead - >> and this second one is with this problem - even with power issues the user >> leds should blink or show something in the console. >> >> Em quarta-feira, 9 de dezembro de 2020 01:37:42 UTC-3, jonnymo escreveu: >>> >>> What size uSD card are you using and how are you powering the board? >>> I've had issues trying to power the AI from a PC USB port and found a power >>> adapter or powered USB hub with the proper power specs works best. >>> >>> Cheers, >>> >>> Jon >>> >>> On Tue, Dec 8, 2020 at 7:43 PM Vinicius Juvinski <[email protected]> >>> wrote: >>> >>>> Hi. >>>> >>>> I tried with : >>>> >>>> https://debian.beagleboard.org/images/am57xx-debian-10.3-iot-tidl-armhf-2020-04-06-6gb.img.xz >>>> and >>>> >>>> https://rcn-ee.net/rootfs/bb.org/testing/2020-11-30/buster-iot/am57xx-debian-10.6-iot-armhf-2020-11-30-4gb.img.xz >>>> >>>> I'm already using the balenaEtcher >>>> >>>> I connected a serial cable on the debug port and I didn't see any >>>> activity on the console, is like the board is really not on. >>>> >>>> >>>> Em quarta-feira, 9 de dezembro de 2020 00:05:22 UTC-3, jonnymo escreveu: >>>>> >>>>> What image did you burn to the uSD card and what tool did you use to >>>>> burn the image? >>>>> Please provide a link to the image used. >>>>> >>>>> Jon >>>>> >>>>> >>>>> On Tue, Dec 8, 2020 at 6:50 PM Vinicius Juvinski < >>>>> [email protected]> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> I create a video showing the problem: >>>>>> >>>>>> https://youtu.be/fGHrLJvQ2J0 >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Em terça-feira, 8 de dezembro de 2020 21:40:32 UTC-3, Vinicius >>>>>> Juvinski escreveu: >>>>>>> >>>>>>> Hi. >>>>>>> >>>>>>> I have a SDcard with lastest debian image for BBIA. >>>>>>> If I plug the sd card and connect the USB Cable, the power led is on >>>>>>> and all other leds are off. >>>>>>> If I unplug the usb, remove sd card and connect the usb cable the >>>>>>> board is working fine, if I plug the sdcard I can mount and see the >>>>>>> filesystem. >>>>>>> >>>>>>> Any clue ? >>>>>>> >>>>>>> Best regards. >>>>>>> >>>>>> >>>>>> Em terça-feira, 8 de dezembro de 2020 21:40:32 UTC-3, Vinicius >>>>>> Juvinski escreveu: >>>>>>> >>>>>>> Hi. >>>>>>> >>>>>>> I have a SDcard with lastest debian image for BBIA. >>>>>>> If I plug the sd card and connect the USB Cable, the power led is on >>>>>>> and all other leds are off. >>>>>>> If I unplug the usb, remove sd card and connect the usb cable the >>>>>>> board is working fine, if I plug the sdcard I can mount and see the >>>>>>> filesystem. >>>>>>> >>>>>>> Any clue ? >>>>>>> >>>>>>> Best regards. >>>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "BeagleBoard" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/beagleboard/14f86f2e-3a92-4a7c-9fd4-6f96d27076d7o%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/beagleboard/14f86f2e-3a92-4a7c-9fd4-6f96d27076d7o%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/beagleboard/eb20ad38-7a38-417a-a6fb-3b01fd894848o%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/beagleboard/eb20ad38-7a38-417a-a6fb-3b01fd894848o%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> > To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/9f2dca70-4f89-4758-8681-7d4096e59705o%40googlegroups.com >> >> <https://groups.google.com/d/msgid/beagleboard/9f2dca70-4f89-4758-8681-7d4096e59705o%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/98b07afc-36b7-4d9a-bb08-e9231a70ad9cn%40googlegroups.com.
