Hi all. Bought this autumn a Board Green and a HDMI cape (sold by Seeed as Plug & Play device...), mounted the cape on the board, green light on, but:...never seen a character from the HDMI port to the HDMI monitor, no signal at all. Never.
OS-Image mounted is Debian 10.3 2020-04-06 IoT SD 4GB. The BBG board is normally managed via SSH session. Tried to solve activating video module in uEnv.txt, shorted the pins of TP4, changed the dipswitches on the cape: no luck at all. Anyway HDMI cape is sold as a Plug & Play device. Digging in Forum I've found someone else with my same problem exposed since 2018, but the posts are with no help or official and clear support from Seeed. The same to me, except for the suggestions from 2 members: it seems that the problem does'nt exists.....but I'm certain it exists. Some concrete help, please? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5d4655f6-388b-49c3-85c7-f21330dc3d05o%40googlegroups.com.
