What I’m facing now is when I change something on uboot - on sd or emc the beagle is not booting -the board is not booting - the power led is on but all the rest is off - and there is nothing on hdmi or serial console . I have to restore the flash or undo the changes on sdcard. For instance I update the kernel and after a reboot the leds is all off.
Sent from my iPhone > Em 31 de dez. de 2020, à(s) 03:12, 张大嘴 <[email protected]> escreveu: > > > Resolved. With the R689 resistor removed, I can boot from eMMC when inserting > an SD card. > 在2020年12月29日星期二 UTC+8 下午10:18:53<张大嘴> 写道： >> I need to put the program on the eMMC and use an SD card to store the data. >> But when I insert an empty SD card, the board card cannot boot the system >> from eMMC > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/cc64da22-c130-4f9b-bb4d-b83d70c3d6b1n%40googlegroups.com. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/2F3C267B-F5DE-4A4D-B9B3-91B2BF8807A3%40gmail.com.
