On Thu, 14 Jan 2021 16:02:25 -0800 (PST), in
gmane.comp.hardware.beagleboard.user "'Ray Willis' via BeagleBoard"
<beagleboard-/[email protected]> wrote:
>I think the fault lies in that the devicetree is still not correct. It is
>somewhat set up as a traditional device for using emmc first and if the uSD
>Card Detect (CD) goes low it will switch the boot up order. Typical
>Beaglebone Black requires a SW be pressed also to switch the boot up order
>upon boot up.
>
The BBB hasn't required use of the boot-select switch for eMMC/uSD for
quite some time -- like the last release of Wheezy (Debian 7). As long as
the eMMC has been flashed with a "modern" image, u-boot (while loading from
eMMC) will switch to using the uSD card to complete the boot process
(device tree, etc.).
--
Dennis L Bieber
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/13f30gh6s39ud5pgnh059vndps4s1id2ef%404ax.com.
