Robert Nelson <[email protected]> wrote:
> On Sun, Feb 7, 2021 at 7:03 AM Chris Green <[email protected]> wrote:
> >
> > I have an old[ish] BBB on which I have been doing some experimenting
> > for a friend.  I have the current Debian 10 console version installed.
> >
> > One of the things to try was to install a Grove cape, one of these:-
> >
> >     https://www.seeedstudio.com/Grove-Base-Cape-for-Beagleboner-v2-0.html
> >
> > It seems to completely disable all ethernet, neither the RJ-45 nor the
> > ethernet over USB works.  Is this to be expected?
> >
> > The BBB's ethernet works fine when the cape is removed again, but
> > having no way to communicate with it when the cape is attached makes
> > it rather difficult to do anything.
> 
> Uh, no... with it plugged in please run..
> 
> sudo /opt/scripts/tools/version.s
> 
Assuming you mean run this without the cape installed as I can't do
anything with the cape installed...

Ah!  It lost an h off the end.  When I found it, output as follows:-

    eeprom:[A335BNLT0A6A0414BBBK1079]
    model:[TI_AM335x_BeagleBone_Black]
    dogtag:[BeagleBoard.org Debian Buster Console Image 2020-04-06]
    bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot
    2018.03-00002-g254339602c]:[location: dd MBR]
    UBOOT: Booted Device-Tree:[am335x-boneblack.dts]
    kernel:[4.19.94-ti-r42]
    /boot/uEnv.txt Settings:
    pkg check: to individually upgrade run: [sudo apt install
    --only-upgrade <pkg>]
    pkg:[bb-cape-overlays]:[4.14.20201221.0-0~buster+20201221]
    pkg:[bb-wl18xx-firmware]:[1.20200813.1-0~buster+20200813]
    pkg:[kmod]:[26-1]
    WARNING:pkg:[librobotcontrol]:[NOT_INSTALLED]
    cmdline:[console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4
    rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100
    quiet]
    dmesg | grep remote
    [   61.422777] remoteproc remoteproc0: wkup_m3 is available
    [   65.123962] remoteproc remoteproc0: powering up wkup_m3
    [   65.124030] remoteproc remoteproc0: Booting fw image
    am335x-pm-firmware.elf, size 217168
    [   65.124587] remoteproc remoteproc0: remote processor wkup_m3 is now
    up
    dmesg | grep pru
    dmesg | grep pinctrl-single
    [    0.892894] pinctrl-single 44e10800.pinmux: 142 pins, size 568
    dmesg | grep gpio-of-helper
    [    0.894634] gpio-of-helper ocp:cape-universal: ready
    END



-- 
Chris Green
·

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/6rk8fh-k5d11.ln1%40esprimo.zbmc.eu.

Reply via email to