Hi Robert I think Lucas is saying he's only trying to build the BSP not QNX. I did this 10 years ago and I also had the latest BSP guides I tried getting these and you need a customer login. It says it's free for education but again BlackBerry bought this. What's funny is this link below takes you to another page which says we support these processors. It also says you should lose the latest version's QNX SDP 7.0 BSP for Texas Instruments AM335x (Beaglebone Black)
https://blackberry.qnx.com/en/support/qnx-board-support-packages Clicking on the above link next to the BSP you see another page saying The QNX Software Center enables you to download and manage QNX Software Development Platform version 7.x and related products. PDF documentation and Licensing information relating to QNX SDP 7 and related products can also be found here. IMPORTANT: SDP 7.x licenses are initially delivered within the myQNX License Manager and MUST be assigned to users via the license manager in order for them to access the product. And no code just a login. That BSP Lucas references is over 6 year's old. Even 10 year's ago you needed a valid company domain and email address for QNX I know GreenHills and maybe WindRiver as well wouldn't even reply to a free email domain and definitely won't give you a 30 day level license key that the license manager needed Lucas is this for education 😉?? I know it's frustrating you might have to reach out them about You end up here QNX Software Center | | | | | | | | | | | QNX Software Center This page provides an overview of QNX's software downloads and binary files, such as PDFs. QNX realtime RTOS - Operating systems, development tools, realtime operating system software and services for connected embedded systems | | | | If you click on Documents on left side of above page you go here http://www.qnx.com/developers/docs/index.html Which says Choose from the following product versions: (Note: Some PDF links may require login and product registration to function.) Clicking on the Document you need ie SP1 takes you here. QNX Software Systems | | | | | | | | | | | QNX Software Systems This page provides access to your personal account information. QNX realtime RTOS - Operating systems, development tools, realtime operating system software and services for connected embedded systems | | | | It was that way 10 year's ago I registered with a my company email. Sorry I can't be more helpful How did you get the images?? Mark Sent from Yahoo Mail on Android On Tue, Mar 2, 2021 at 5:52 AM, [email protected]<[email protected]> wrote: It is a long time since I did any of this, so please forgive any errors and omissions. You build a file system image from folders of existing (binary) components and folders of freshly created (binary) components. All guided by a script and/or configuration file. The build process will not build and replace existing components. I found it very difficult to know which version of component was in the file system image. IIRC, Any component specified by the script/configuration is search for in the:- existing folder -- left over rubbish? - QNX target folder -- correct PATH? - freshly created folder -- actually built? On Tuesday, 2 March 2021 at 07:25:37 UTC [email protected] wrote: The setup I use should be correct since this is the one provided by QNX directly (MLO first, u-boot and image). Moreover, if my setup was incorrect, the prebuilt image could not work. Yes i rebuilt all by following this https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Bsp_650InstallationNotes but that does not workWhy does it say that I use QNX 6.5.0 (2010) whereas I compile with QNX 6.5.0 SP1 (2012) ? I don't understand, we have been working on this for 3 weeks Le lundi 1 mars 2021 à 19:07:16 UTC+1, [email protected] a écrit : I assumed you did rebuild all <https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Bsp_650InstallationNotes> On Monday, 1 March 2021 at 17:02:25 UTC lazarman wrote: I remember sd card setup was important on Beagle board. your probably following old or incorrect instructions. What was on this board could be important. What instructions as well.They used to have a forum before Blackberry bought them. Sent from Yahoo Mail on Android On Mon, Mar 1, 2021 at 10:52 AM, [email protected]<[email protected]> wrote: I vaguely remember the SP install being two manual steps, one being copying files from one place to another On Monday, 1 March 2021 at 16:02:15 UTC [email protected] wrote: Hello, I would like to use QNX on my BeagleBone Black. I have downloaded the QNX Neutrino 6.5.0 SP1 BSP here: https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/TiAm335Beaglebone When I load the prebuilt image, it starts perfectly but when I try to build the BSP by myself, I have this : Jumping to QNX System page at phys:80011000 user:fc404000 kern:fc404000Starting next program at vfe046604cpu_startnext: cpu0 -> fe046604VFPv3: fpsid=410330c3coproc_attach(10): replacing fe07601c with fe0758bccoproc_attach(11): replacing fe07601c with fe0758bcWelcome to QNX Neutrino 6.5.0 SP1 on the Texas Instruments BeagleBone (ARMv7 Cortex-A8 core) - Board Shutdown[0,0] S/C/F=11/1/11 C/D=fe01c68c/fe099ff4 state(c0)= now lockQNX Version 6.5.0 Release 2010/07/09-14:26:46EDT[0]PID-TID=1-6? P/T FL=00019001/05020000 "proc/boot/procnto-instr"[0]ASPACE PID=2 PF=00008012armle context[effe8f4c]:0000: 8ffb2000 8ffb2000 8ffb2c01 00000181 effccbf8 01000000 00000000 fc0040000020: fc004000 effdf47c 01072fff 00000008 00000000 effe8f90 fe046878 fe040e0c0040: 60000013instruction[fe040e0c]:06 30 98 e7 1c 20 94 e5 11 00 12 e3 00 70 94 15 18 20 9d 15 07 70 82 11 0c 00stack[effe8f90]:0000: effe8fbc e18a1000 00000000 efffb348 effca00c 003fffff 00000a6e e19881600020: 8ffb2000 fffff000 00000000 00000007 00000040 effccbf8 fe099ff0 010000000040: 000000ff efff0090 00000073 0000008d effca6e8 fe044744 effccbf8 fe044ad00060: efffb348 fe069bac efffb348 fe071e30 effe9018 00000000 00000000 00000000ÿ As we can see, I have this message : QNX Version 6.5.0 Release 2010/07/09-14:26:46EDTThis means that I try to compile with QNX 6.5.0 and not QNX 6.5.0 SP1. I don't understand why i have this message because I have well installed QNX 6.5.0 SP1 : Do I miss something ? Do I have to activate someting somewhere ? Thank you for your help. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/84dc332e-7fc5-4b20-bf82-05224d394938n%40googlegroups.com. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4d7cb1d3-78ab-4f57-b58d-b5ea462b96fan%40googlegroups.com. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/1501738875.1038181.1614727459917%40mail.yahoo.com.
