Hi Martin, thanks for your answer. I realized with dmesg that my board is detected as BBB. The version.sh output is not very clear due to not ascii characters, but seems different from the ones printed on my beagleobones sticker.
git:/opt/scripts/:[d36fe9a7be9ebfc872b10a470e904ab4c61c4516] ]eprom:[A335BNLT°O dogtag:[BeagleBoard.org Debian Image 2017-10-10] bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2017.09-00002-g0f3f1c7907] kernel:[4.4.91-ti-r133] nodejs:[v6.12.2] uboot_overlay_options:[enable_uboot_overlays=1] uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-4-TI-0 0A0.dtbo] uboot_overlay_options:[enable_uboot_cape_universal=1] pkg:[bb-cape-overlays]:[4.4.20171215.0-0rcnee1~stretch+20171215] pkg:[bb-wl18xx-firmware]:[1.20170829-0rcnee1~stretch+20170829] pkg:[firmware-ti-connectivity]:[20170823-1rcnee0~stretch+20170830] Now, as written on link you suggested, I need to rewrite eeprom with BBBW data. It is reported to ground TP1 before the dd command, but by schematic WP of CAT24C256W is connected with a resistor to VDD (write protect fixed), and TP1 is just a DGND. How did you rewrite the eeprom? Forcing WP signal to DGND? Regards Renato Il giorno sabato 20 marzo 2021 alle 19:14:49 UTC+1 [email protected] ha scritto: > hi, > check out the rfkill command. > do you have both, wifi and bluetooth unblocked ? > > Once i had the problem that the bbbw will be detected as an beagle bone > black. > Check out the dmesg command. Very at the beginnig you can read if a bbbw > or a bbb was detected. > > if a bbb was detected check out /opt/tools version.sh command. (It is > somwhere in this directory) > > Check if your eeprom name is the same as the one that is printed on your > beagleobones sticker on P9 header or P8 header. > > If there is something different checkout this post: > https://groups.google.com/g/beagleboard/c/7DoU66kyjp4 > > > bye bye > > > > > > Am Sa., 20. März 2021 um 19:09 Uhr schrieb renato borromeo < > [email protected]>: > >> I all, >> I have a BBBw with the original "Linux beaglebone 4.4.91-ti-r133" on >> board. >> With "ip a" command wlan0 is not present and also with connmanctl >> technologies command only wired eth is present even if the BBBw has only >> wifi and bluetooth. >> >> I followed several link about this issue and checked newer and older >> images >> with same results. >> >> Do I need a specific device tree to enable this wifi module or something >> else? >> >> Thanks in advances for support. >> >> Renato Borromeo >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/b5e3bb92-3edc-4a9e-bef5-5732a94186a2n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/beagleboard/b5e3bb92-3edc-4a9e-bef5-5732a94186a2n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4c752b12-4d4e-4af1-be36-7eb8046addddn%40googlegroups.com.
