Hello Robert,
Attached is a trace file. I am using the
file am57xx-eMMC-flasher-debian-10.3-iot-armhf-2020-04-06-4gb.img and I
burned it into SDCARD by using the balena tool.
If I boot with the regular card, I don't see /dev/mmcblk1 in the ls /dev
command.
Could it be a damaged nand flash memory?
Also, I see that the boot program doesn't have any nand test utility which
is common to other Linux uboot systems.
Best Regards,
Pedro
On Tue, Apr 27, 2021 at 11:59 AM Robert Nelson <robertcnel...@gmail.com>
wrote:
> On Mon, Apr 26, 2021 at 12:26 PM Pedro Cruz <ped...@gmail.com> wrote:
> >
> > Hi,
> >
> > I am trying to flash BB_AI with eMMC flasher with
> am57xx-eMMC-flasher-debian-10.3-iot-armhf-2020-04-06-4gb.img but it aborts
> flashing.
> >
> > It comes with the following error:
> >
> > Error: [/dev/mmcblk1] does not exist
> >
> > Can you help please.
>
> Please share the full boot log of the "flasher" lots of good
> information is dumped before it "failed"..
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to a topic in the
> Google Groups "BeagleBoard" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/beagleboard/hIjNm8Rgwsk/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/CAOCHtYhaDo6JqwsKkX7D-%3DGwtQpAr8DThBag%2B7in-H9gq%2BEL5w%40mail.gmail.com
> .
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/CAGq_DXa0_fcPvcMtqXjtU%3DNgA8t9wp5PUp7_4JytzOypm89%2Byw%40mail.gmail.com.
ΓΈ
U-Boot 2019.07-rc4-00001-g607b5b738b (Jul 06 2019 - 21:01:15 -0500), Build:
jenkins-github_Bootloader-Builder-127
CPU : DRA752-GP ES2.0
Model: BeagleBoard.org BeagleBone AI
Board: BeagleBone AI REV A
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Card did not respond to voltage select!
invalid mmc device
CTRL_CORE_PAD_I2C1_SDA: 0x00060000
CTRL_CORE_PAD_I2C1_SCL: 0x00060000
CTRL_CORE_PAD_GPMC_A0: 0x00060007
CTRL_CORE_PAD_GPMC_A1: 0x00060007
CTRL_CORE_PAD_VIN2A_D4: 0x0005000f
CTRL_CORE_PAD_VIN2A_D5: 0x0005000f
CM_L4PER_GPIO7_CLKCTRL: 0x00000001
CM_L4PER_I2C1_CLKCTRL: 0x00000002
CM_L4PER_I2C4_CLKCTRL: 0x00000002
CM_L4PER_L4_PER1_CLKCTRL 0x00000001
PM_L4PER_I2C1_WKDEP 0x0000b000
RM_L4PER_I2C1_CONTEXT 0x00000002
PM_L4PER_I2C4_WKDEP 0x0000b000
RM_L4PER_I2C4_CONTEXT 0x00000001
BeagleBone: cape eeprom: i2c_probe: 0x54
Checking (ret 1 bus works) I2C1 bus. ret 1
Checking (ret 1 bus works) I2C4 bus. ret 1
BeagleBone: cape eeprom: i2c_probe: 0x55
Checking (ret 1 bus works) I2C1 bus. ret 1
Checking (ret 1 bus works) I2C4 bus. ret 1
BeagleBone: cape eeprom: i2c_probe: 0x56
Checking (ret 1 bus works) I2C1 bus. ret 1
Checking (ret 1 bus works) I2C4 bus. ret 1
BeagleBone: cape eeprom: i2c_probe: 0x57
Checking (ret 1 bus works) I2C1 bus. ret 1
Found device at address 0x57
Net:
Warning: ethernet@48484000 using MAC address from ROM
eth0: ethernet@48484000
Press SPACE to abort autoboot in 1 seconds
usb_boot is currently disabled
scsi_boot is currently disabled
switch to partitions #0, OK
mmc0 is current device
Partition Map for MMC device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type
1 8192 7364608 039c5d23-01 83 Boot
Scanning mmc device 0
Checking for: /uEnv.txt ...
Checking for: /boot/uEnv.txt ...
449 bytes read in 2 ms (218.8 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt ...
debug: [uname_r=4.19.94-ti-r42] ...
loading /boot/vmlinuz-4.19.94-ti-r42 ...
10095592 bytes read in 872 ms (11 MiB/s)
loading /boot/dtbs/4.19.94-ti-r42/am5729-beagleboneai.dtb ...
137339 bytes read in 14 ms (9.4 MiB/s)
uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to enable...
loading /boot/initrd.img-4.19.94-ti-r42 ...
6589689 bytes read in 569 ms (11 MiB/s)
debug: [console=ttyS0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait
init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3-no-eeprom.sh] ...
debug: [bootz 0x82000000 0x88080000:648cf9 0x88000000] ...
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8f9b7000, end 8ffffcf9 ... OK
Loading Device Tree to 8f992000, end 8f9b687a ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.94-ti-r42 (voodoo@x3-am57xx-beagle-x15-2gb)
(gcc version 8.3.0 (Debian 8.3.0-6)) #1buster SMP PREEMPT Tue Mar 31 19:38:29
UTC 2020
[ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: BeagleBoard.org BeagleBone AI
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x95800000, size 56
MiB
[ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000,
compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x99000000, size 64
MiB
[ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000,
compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x9d000000, size 32
MiB
[ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000,
compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x9f000000, size 8
MiB
[ 0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000,
compatible id shared-dma-pool
[ 0.000000] cma: Reserved 48 MiB at 0xbc800000
[ 0.000000] OMAP4: Map 0xbfe00000 to (ptrval) for dram barrier
[ 0.000000] DRA752 ES2.0
[ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4
with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu s38988 r8192 d22452 u69632
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 153728
[ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p1
ro rootfstype=ext4 rootwait
init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3-no-eeprom.sh
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 404156K/619520K available (13312K kernel code, 1136K
rwdata, 4308K rodata, 1024K init, 350K bss, 35140K reserved, 180224K
cma-reserved, 79872K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (14304 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1137 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 351 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 42043 entries in 124 pages
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] OMAP clockevent source: timer1 at 32786 Hz
[ 0.000000] arch_timer: cp15 timer(s) running at 6.14MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns
[ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every
4398046511023ns
[ 0.000019] Switching to timer-based delay loop, resolution 162ns
[ 0.000464] clocksource: 32k_counter: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 58327039986419 ns
[ 0.000475] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.001247] Console: colour dummy device 80x30
[ 0.001291] Calibrating delay loop (skipped), value calculated using timer
frequency.. 12.29 BogoMIPS (lpj=24590)
[ 0.001307] pid_max: default: 32768 minimum: 301
[ 0.001468] Security Framework initialized
[ 0.001480] Yama: becoming mindful.
[ 0.001570] AppArmor: AppArmor initialized
[ 0.001647] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001661] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.002348] CPU: Testing write buffer coherency: ok
[ 0.002387] CPU0: Spectre v2: using ICIALLU workaround
[ 0.002642] /cpus/cpu@0 missing clock-frequency property
[ 0.002665] /cpus/cpu@1 missing clock-frequency property
[ 0.002679] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.023922] Setting up static identity map for 0x80100000 - 0x80100060
[ 0.031929] rcu: Hierarchical SRCU implementation.
[ 0.048012] smp: Bringing up secondary CPUs ...
[ 0.080407] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.080414] CPU1: Spectre v2: using ICIALLU workaround
[ 0.080573] smp: Brought up 1 node, 2 CPUs
[ 0.080586] SMP: Total of 2 processors activated (24.59 BogoMIPS).
[ 0.080596] CPU: All CPU(s) started in HYP mode.
[ 0.080604] CPU: Virtualization extensions available.
[ 0.081863] devtmpfs: initialized
[ 0.105594] VFP support v0.3: implementor 41 architecture 4 part 30 variant
f rev 0
[ 0.105948] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.105969] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.109476] xor: automatically using best checksumming function neon
[ 0.109494] pinctrl core: initialized pinctrl subsystem
[ 0.110371] NET: Registered protocol family 16
[ 0.112619] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.113746] omap_hwmod: l3_main_2 using broken dt data from ocp
[ 0.243674] wkupaon_cm:clk:0068:0: failed to disable
[ 0.331989] audit: initializing netlink subsys (disabled)
[ 0.332176] audit: type=2000 audit(0.320:1): state=initialized
audit_enabled=0 res=1
[ 0.345209] OMAP GPIO hardware version 0.1
[ 0.381492] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint
registers.
[ 0.381506] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.382437] OMAP DMA hardware revision 0.0
[ 0.394568] raid6: using algorithm neonx8 gen() 0 MB/s
[ 0.394581] raid6: .... xor() 0 MB/s, rmw enabled
[ 0.394592] raid6: using neon recovery algorithm
[ 0.396627] edma 43300000.edma: memcpy is disabled
[ 0.401144] edma 43300000.edma: TI EDMA DMA engine driver
[ 0.410784] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
(LinkedList1/2/3 supported)
[ 0.414631] omap-iommu 40d01000.mmu: 40d01000.mmu registered
[ 0.414798] omap-iommu 40d02000.mmu: 40d02000.mmu registered
[ 0.415058] omap-iommu 58882000.mmu: 58882000.mmu registered
[ 0.415291] omap-iommu 55082000.mmu: 55082000.mmu registered
[ 0.415692] omap-iommu 41501000.mmu: 41501000.mmu registered
[ 0.415845] omap-iommu 41502000.mmu: 41502000.mmu registered
[ 0.416199] iommu: Adding device 58820000.ipu to group 1
[ 0.416298] iommu: Adding device 55020000.ipu to group 2
[ 0.416502] iommu: Adding device 40800000.dsp to group 0
[ 0.416781] iommu: Adding device 41000000.dsp to group 3
[ 0.418099] SCSI subsystem initialized
[ 0.418505] usbcore: registered new interface driver usbfs
[ 0.418559] usbcore: registered new interface driver hub
[ 0.418642] usbcore: registered new device driver usb
[ 0.420343] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[ 0.420845] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 100 kHz
[ 0.421130] pps_core: LinuxPPS API ver. 1 registered
[ 0.421141] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 0.421164] PTP clock support registered
[ 0.421603] omap-mailbox 4a0f4000.mailbox: no available mbox devices found
[ 0.421673] omap-mailbox 4883a000.mailbox: no available mbox devices found
[ 0.421741] omap-mailbox 4883c000.mailbox: no available mbox devices found
[ 0.421807] omap-mailbox 4883e000.mailbox: no available mbox devices found
[ 0.422086] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
[ 0.422400] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
[ 0.422492] omap-mailbox 48844000.mailbox: no available mbox devices found
[ 0.422561] omap-mailbox 48846000.mailbox: no available mbox devices found
[ 0.422627] omap-mailbox 4885e000.mailbox: no available mbox devices found
[ 0.422692] omap-mailbox 48860000.mailbox: no available mbox devices found
[ 0.422756] omap-mailbox 48862000.mailbox: no available mbox devices found
[ 0.422821] omap-mailbox 48864000.mailbox: no available mbox devices found
[ 0.422885] omap-mailbox 48802000.mailbox: no available mbox devices found
[ 0.423451] Advanced Linux Sound Architecture Driver Initialized.
[ 0.423967] NetLabel: Initializing
[ 0.423979] NetLabel: domain hash size = 128
[ 0.423988] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.424059] NetLabel: unlabeled traffic allowed by default
[ 0.424549] clocksource: Switched to clocksource arch_sys_counter
[ 0.546503] VFS: Disk quotas dquot_6.6.0
[ 0.546577] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.547277] AppArmor: AppArmor Filesystem Enabled
[ 0.559315] NET: Registered protocol family 2
[ 0.559994] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144
bytes)
[ 0.560027] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.560067] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.560136] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.560229] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.560255] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.560420] NET: Registered protocol family 1
[ 0.565091] RPC: Registered named UNIX socket transport module.
[ 0.565103] RPC: Registered udp transport module.
[ 0.565112] RPC: Registered tcp transport module.
[ 0.565122] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.565640] Unpacking initramfs...
[ 0.806204] Freeing initrd memory: 6436K
[ 0.807115] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[ 0.807369] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7
counters available
[ 0.809338] Initialise system trusted keyrings
[ 0.809562] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.815687] zbud: loaded
[ 0.817926] NFS: Registering the id_resolver key type
[ 0.817952] Key type id_resolver registered
[ 0.817963] Key type id_legacy registered
[ 0.817983] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.818165] fuse init (API version 7.27)
[ 0.824063] Key type asymmetric registered
[ 0.824077] Asymmetric key parser 'x509' registered
[ 0.824138] bounce: pool size: 64 pages
[ 0.824189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
246)
[ 0.824323] io scheduler noop registered
[ 0.824336] io scheduler deadline registered
[ 0.824495] io scheduler cfq registered (default)
[ 0.824508] io scheduler mq-deadline registered
[ 0.830975] pinctrl-single 4a003400.pinmux: 282 pins, size 1128
[ 0.841088] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 0.843782] console [ttyS0] disabled
[ 0.843838] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 43, base_baud =
3000000) is a 8250
[ 1.865148] console [ttyS0] enabled
[ 1.869428] 48068000.serial: ttyS5 at MMIO 0x48068000 (irq = 44, base_baud =
3000000) is a 8250
[ 1.880738] omap_rng 48090000.rng: Random Number Generator ver. 20
[ 1.881249] random: fast init done
[ 1.888162] sdhci: Secure Digital Host Controller Interface driver
[ 1.890572] random: crng init done
[ 1.896686] sdhci: Copyright(c) Pierre Ossman
[ 1.905028] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.911573] omap_gpio 4805d000.gpio: Could not set line 27 debounce to
200000 microseconds (-22)
[ 1.920425] sdhci-omap 4809c000.mmc: Got CD GPIO
[ 1.925292] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.4
[ 1.932083] sdhci-omap 4809c000.mmc: failed to set system capabilities
[ 1.938750] sdhci-omap 4809c000.mmc: Dropping the link to regulator.4
[ 1.945780] sdhci-omap 480b4000.mmc: allocated mmc-pwrseq
[ 1.951314] sdhci-omap 480b4000.mmc: failed to set system capabilities
[ 1.958331] sdhci-omap 480d1000.mmc: allocated mmc-pwrseq
[ 1.963863] sdhci-omap 480d1000.mmc: 480d1000.mmc supply vqmmc not found,
using dummy regulator
[ 1.972727] sdhci-omap 480d1000.mmc: Linked as a consumer to regulator.0
[ 1.979542] sdhci-omap 480d1000.mmc: Dropping the link to regulator.0
[ 1.998565] libphy: Fixed MDIO Bus: probed
[ 2.003571] CAN device driver interface
[ 2.048590] davinci_mdio 48485000.mdio: davinci mdio revision 1.6, bus freq
1000000
[ 2.056315] libphy: 48485000.mdio: probed
[ 2.070202] davinci_mdio 48485000.mdio: phy[4]: device 48485000.mdio:04,
driver Atheros 8035 ethernet
[ 2.080125] cpsw 48484000.ethernet: Detected MACID = 28:ec:9a:f1:7f:3a
[ 2.086784] cpsw 48484000.ethernet: initialized cpsw ale version 1.4
[ 2.093191] cpsw 48484000.ethernet: ALE Table size 1024
[ 2.098510] cpsw 48484000.ethernet: cpts: overflow check period 1250
(jiffies)
[ 2.107301] usbcore: registered new interface driver smsc95xx
[ 2.115310] dwc3 488d0000.usb: Failed to get clk 'ref': -2
[ 2.122007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.128614] ehci-platform: EHCI generic platform driver
[ 2.134272] ehci-omap: OMAP-EHCI Host Controller driver
[ 2.140513] usbcore: registered new interface driver usb-storage
[ 2.150429] omap_rtc 48838000.rtc: registered as rtc1
[ 2.156898] i2c /dev entries driver
[ 2.165832] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 2.173138] softdog: initialized. soft_noboot=0 soft_margin=60 sec
soft_panic=0 (nowayout=0)
[ 2.184614] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.191128] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3
[ 2.197109] omap-aes 4b500000.aes: will run requests pump with realtime
priority
[ 2.205502] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3
[ 2.211472] omap-aes 4b700000.aes: will run requests pump with realtime
priority
[ 2.219405] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2
[ 2.225384] omap-des 480a5000.des: will run requests pump with realtime
priority
[ 2.234072] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3
[ 2.244190] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.251730] omap_gpio 48057000.gpio: Could not set line 13 debounce to 20000
microseconds (-22)
[ 2.261796] gnss: GNSS driver registered with major 242
[ 2.272163] NET: Registered protocol family 10
[ 2.310483] Segment Routing with IPv6
[ 2.314294] mip6: Mobile IPv6
[ 2.317385] NET: Registered protocol family 17
[ 2.321884] can: controller area network core (rev 20170425 abi 9)
[ 2.328167] NET: Registered protocol family 29
[ 2.332700] 8021q: 802.1Q VLAN Support v1.8
[ 2.336960] Key type dns_resolver registered
[ 2.341274] mpls_gso: MPLS GSO support
[ 2.345158] ThumbEE CPU extension supported.
[ 2.349477] Registering SWP/SWPB emulation handler
[ 2.354312] omap_voltage_late_init: Voltage driver support not added
[ 2.360721] Power Management for TI OMAP4+ devices.
[ 2.366635] registered taskstats version 1
[ 2.370783] Loading compiled-in X.509 certificates
[ 2.375682] zswap: loaded using pool lzo/zbud
[ 2.382287] Btrfs loaded, crc32c=crc32c-generic
[ 2.386921] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.425696] dmm 4e000000.dmm: workaround for errata i878 in use
[ 2.433426] dmm 4e000000.dmm: initialized all PAT entries
[ 2.439621] palmas 0-0058: Irq flag is 0x00000008
[ 2.472274] palmas 0-0058: Muxing GPIO 2b, PWM 0, LED 0
[ 2.479574] SMPS12: supplied by regulator-dummy
[ 2.486222] SMPS3: supplied by vdd_5v
[ 2.491829] SMPS45: supplied by regulator-dummy
[ 2.498501] SMPS6: supplied by vdd_5v
[ 2.504214] SMPS7: supplied by vdd_5v
[ 2.510155] SMPS8: supplied by vdd_5v
[ 2.515345] SMPS9: supplied by vdd_5v
[ 2.520205] LDO1: supplied by vdd_5v
[ 2.525990] LDO2: supplied by vdd_5v
[ 2.531550] LDO3: supplied by vdd_5v
[ 2.537129] LDO4: supplied by vdd_5v
[ 2.542706] LDO5: supplied by regulator-dummy
[ 2.547933] LDO6: supplied by regulator-dummy
[ 2.553162] LDO7: supplied by regulator-dummy
[ 2.558394] LDO8: supplied by regulator-dummy
[ 2.563600] LDO9: supplied by vdd_5v
[ 2.569744] LDOLN: supplied by vdd_5v
[ 2.575323] LDOUSB: supplied by vdd_5v
[ 2.586138] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core:
registered 48070000.i2c:tps659038@58:tps659038_rtc as rtc0
[ 2.599618] palmas_pwrbutton 48070000.i2c:tps659038@58:tps659038_pwr_button:
h/w controlled shutdown duration=12 seconds
[ 2.611844] input: palmas_pwron as
/devices/platform/44000000.ocp/48070000.i2c/i2c-0/0-0058/48070000.i2c:tps659038@58:tps659038_pwr_button/input/input0
[ 2.626774] stmpe-i2c 0-0041: stmpe811 detected, chip id: 0x811
[ 2.653278] stmpe-gpio stmpe-gpio: DMA mask not set
[ 2.659451] stmpe-ts stmpe-ts: DMA mask not set
[ 2.667679] input: stmpe-ts as
/devices/platform/44000000.ocp/48070000.i2c/i2c-0/0-0041/stmpe-ts/input/input1
[ 2.678322] stmpe-i2c 0-0041: platform wants blocks (0x10) not present on
variant
[ 2.686457] phy phy-4a084000.phy.2: Linked as a consumer to regulator.26
[ 2.693831] phy phy-4a085000.phy.3: Linked as a consumer to regulator.26
[ 2.701490] omap_gpio 4805d000.gpio: Could not set line 27 debounce to
200000 microseconds (-22)
[ 2.710344] sdhci-omap 4809c000.mmc: Got CD GPIO
[ 2.715251] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.4
[ 2.722311] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.16
[ 2.729247] sdhci-omap 4809c000.mmc: Dropping the link to regulator.16
[ 2.736123] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.15
[ 2.743223] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.16
[ 2.750209] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_1_8v mode
[ 2.756883] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode
[ 2.763555] sdhci-omap 4809c000.mmc: no pinctrl state for hs200_1_8v mode
[ 2.797346] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA
[ 2.805035] sdhci-omap 480b4000.mmc: allocated mmc-pwrseq
[ 2.810875] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.17
[ 2.818362] sdhci-omap 480b4000.mmc: Dropping the link to regulator.17
[ 2.825279] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.17
[ 2.859012] mmc1: SDHCI controller on 480b4000.mmc [480b4000.mmc] using ADMA
[ 2.866713] sdhci-omap 480d1000.mmc: allocated mmc-pwrseq
[ 2.872329] sdhci-omap 480d1000.mmc: 480d1000.mmc supply vqmmc not found,
using dummy regulator
[ 2.881154] sdhci-omap 480d1000.mmc: Linked as a consumer to regulator.0
[ 2.887998] sdhci-omap 480d1000.mmc: Dropping the link to regulator.0
[ 2.895089] sdhci-omap 480d1000.mmc: Linked as a consumer to regulator.15
[ 2.912064] mmc0: host does not support reading read-only switch, assuming
write-enable
[ 2.925601] mmc0: new high speed SDHC card at address aaaa
[ 2.931917] mmcblk0: mmc0:aaaa SU04G 3.69 GiB
[ 2.936439] mmc2: SDHCI controller on 480d1000.mmc [480d1000.mmc] using PIO
[ 2.945232] omapdss_dss 58000000.dss: Linked as a consumer to regulator.25
[ 2.952402] mmcblk0: p1
[ 2.956190] DSS: OMAP DSS rev 6.1
[ 2.961793] omapdss_hdmi5 58040000.encoder: Linked as a consumer to
regulator.19
[ 2.969501] omapdss_hdmi5 58040000.encoder: Dropping the link to regulator.19
[ 2.979931] dwc3 48890000.usb: Failed to get clk 'ref': -2
[ 2.995031] OF: graph: no port node found in
/ocp/ocp2scp@4a080000/phy@4a084000
[ 3.002928] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.009230] dwc3 488d0000.usb: Failed to get clk 'ref': -2
[ 3.015798] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.021536] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus
number 1
[ 3.029671] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version
0x100 quirks 0x0000000002010010
[ 3.039231] xhci-hcd xhci-hcd.0.auto: irq 210, io mem 0x488d0000
[ 3.045350] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.051509] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 4.19
[ 3.060011] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.067460] usb usb1: Product: xHCI Host Controller
[ 3.072575] usb usb1: Manufacturer: Linux 4.19.94-ti-r42 xhci-hcd
[ 3.078897] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 3.084344] dwc3 48890000.usb: changing max_speed on rev 5533202a
[ 3.090946] hub 1-0:1.0: USB hub found
[ 3.094896] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.101686] hub 1-0:1.0: 1 port detected
[ 3.106296] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.111922] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus
number 2
[ 3.119673] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 3.126636] usb usb2: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 3.135072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 4.19
[ 3.143440] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.150966] usb usb2: Product: xHCI Host Controller
[ 3.156085] usb usb2: Manufacturer: Linux 4.19.94-ti-r42 xhci-hcd
[ 3.162413] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 3.167851] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.173583] hub 2-0:1.0: USB hub found
[ 3.177457] hub 2-0:1.0: 1 port detected
[ 3.182451] mmc2: queuing unknown CIS tuple 0x81 (1 bytes)
[ 3.189007] cpu cpu0: Linked as a consumer to regulator.9
[ 3.194701] cpu cpu0: Linked as a consumer to regulator.5
[ 3.201771] cpu cpu0: _opp_add_static_v2: Multiple suspend OPPs found
(1000000000 400000000)
[ 3.214217] omapdss_hdmi5 58040000.encoder: Linked as a consumer to
regulator.19
[ 3.222038] omapdss_dss 58000000.dss: bound 58001000.dispc (ops
dispc_component_ops)
[ 3.230486] omap-hdmi-audio omap-hdmi-audio.1.auto: snd-soc-dummy-dai <->
58040000.encoder mapping ok
[ 3.240296] omapdss_dss 58000000.dss: bound 58040000.encoder (ops
hdmi5_component_ops)
[ 3.249198] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.255883] [drm] No driver support for vblank timestamp query.
[ 3.262292] omapdss error: HDMI I2C Master Error
[ 3.272436] [drm] Enabling DMM ywrap scrolling
[ 3.281427] Console: switching to colour frame buffer device 128x48
[ 3.291548] omapdrm omapdrm.0: fb0: omapdrm frame buffer device
[ 3.298144] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0
[ 3.306630] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: setting
system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.318516] ALSA device list:
[ 3.321510] #0: HDMI 58040000.encoder
[ 3.328291] Freeing unused kernel memory: 1024K
[ 3.333051] Run /init as init process
Loading, please wait...
Starting version 241
[ 3.387930] mmc2: new high speed SDIO card at address 0001
[ 4.329764] omapdss error: HDMI I2C Master Error
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Warning: fsck not present, so skipping root file system
[ 5.179132] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode.
Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[3J================================================================================
Starting eMMC Flasher from microSD media
Version: [1.20180412: all ssh regneration override...]
================================================================================
================================================================================
Prepare environment for flashing
Starting at Sat Jan 1 00:00:02 UTC 2000
----------------------------------------
==> Giving system time to stablize...
5 4 3 2 1
==> Preparing /tmp
==> Preparing sysctl
==> sysctl: vm.min_free_kbytes=[2277]
==> sysctl: setting: [sysctl -w vm.min_free_kbytes=16384]
vm.min_free_kbytes = 16384
----------------------------------------
==> Determining root drive
==> console=ttyS0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait
init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3-no-eeprom.sh
----------------------------------------
==> root_drive=[/dev/mmcblk0p1]
====> Root drive identified at [/dev/mmcblk0p1]
==> Boot Drive [/dev/mmcblk0p1]
==> Figuring out Source and Destination devices
====> Source identified: [/dev/mmcblk0]
====> Destination identified: [/dev/mmcblk1]
==> Figuring out machine
====> Machine is BeagleBoard.org_BeagleBone_AI
====> Machine is compatible with BeagleBone Black
================================================================================
5 4 3 2 1
================================================================================
Checking running system
==> Copying: [/dev/mmcblk0] -> [/dev/mmcblk1]
==> lsblk:
----------------------------------------
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk0 179:0 0 3.7G 0 disk
`-mmcblk0p1 179:1 0 3.5G 0 part /
----------------------------------------
==> df -h | grep rootfs:
----------------------------------------
!==> Error: [/dev/mmcblk1] does not exist
writing to [/dev/mmcblk1] failed...
==> Stopping Cylon LEDs ...
Traceback (last called is first):
reset_leds() in /opt/scripts/tools/eMMC/functions.sh:433
write_failure() in /opt/scripts/tools/eMMC/functions.sh:451
check_running_system() in /opt/scripts/tools/eMMC/functions.sh:614
main() in /opt/scripts/tools/eMMC/init-eMMC-flasher-v3-no-eeprom.sh:44
The command kill $CYLON_P[ 16.062187] Kernel panic - not syncing: Attempted
to kill init! exitcode=0x00000100
[ 16.062187]
ID > /dev/null 2>&1 exited with exit code 2.
==================[ 16.076768] CPU: 1 PID: 1 Comm: init-eMMC-flash Not
tainted 4.19.94-ti-r42 #1buster
==============================================================
[ 16.090027] Hardware name: Generic DRA74X (Flattened Device Tree)
Tearing Down script environment
==> Unmounting /tmp
blockdev: [ 16.101740] [<c0113e18>] (unwind_backtrace) from [<c010e388>]
(show_stack+0x20/0x24)
cannot open /dev/mmcblk1: No such file or directory
==> Stoppin[ 16.115081] [<c010e388>] (show_stack) from [<c0d20f5c>]
(dump_stack+0x8c/0xa0)
g Cylon LEDs ...
==> Setting LEDs to
[ 16.127907] [<c0d20f5c>] (dump_stack) from [<c013c6f0>] (panic+0x10c/0x278)
[ 16.138378] [<c013c6f0>] (panic) from [<c01428e4>] (do_exit+0xbf0/0xc08)
[ 16.145108] [<c01428e4>] (do_exit) from [<c0142998>]
(do_group_exit+0x50/0xd0)
[ 16.152361] [<c0142998>] (do_group_exit) from [<c0142a38>]
(__wake_up_parent+0x0/0x30)
[ 16.160312] [<c0142a38>] (__wake_up_parent) from [<c0101000>]
(ret_fast_syscall+0x0/0x54)
[ 16.168521] Exception stack(0xd4163fa8 to 0xd4163ff0)
[ 16.173592] 3fa0: b6f4d6d8 b6f4d6d8 00000001 00000000
e7e53e00 00000001
[ 16.181804] 3fc0: b6f4d6d8 b6f4d6d8 00000000 000000f8 00000001 00000000
b6f52140 b6f4f000
[ 16.190013] 3fe0: 000000f8 bee4ab54 b6ece389 b6e70746
[ 16.195088] CPU0: stopping
[ 16.197808] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.94-ti-r42 #1buster
[ 16.204971] Hardware name: Generic DRA74X (Flattened Device Tree)
[ 16.211095] [<c0113e18>] (unwind_backtrace) from [<c010e388>]
(show_stack+0x20/0x24)
[ 16.218873] [<c010e388>] (show_stack) from [<c0d20f5c>]
(dump_stack+0x8c/0xa0)
[ 16.226127] [<c0d20f5c>] (dump_stack) from [<c0111b70>]
(handle_IPI+0x3f4/0x420)
[ 16.233557] [<c0111b70>] (handle_IPI) from [<c010239c>]
(gic_handle_irq+0x84/0x88)
[ 16.241158] [<c010239c>] (gic_handle_irq) from [<c0101a0c>]
(__irq_svc+0x6c/0xa8)
[ 16.248669] Exception stack(0xc1501ed8 to 0xc1501f20)
[ 16.253739] 1ec0:
00000000 00004c48
[ 16.261950] 1ee0: fe600000 00000000 ffffe000 c1506e34 c1506e7c 00000001
00000001 c15dd67a
[ 16.270161] 1f00: c10e3054 c1501f34 c1501f14 c1501f28 c012cdd4 c010a6f4
60010013 ffffffff
[ 16.278375] [<c0101a0c>] (__irq_svc) from [<c010a6f4>]
(arch_cpu_idle+0x30/0x4c)
[ 16.285806] [<c010a6f4>] (arch_cpu_idle) from [<c0d3d04c>]
(default_idle_call+0x38/0x3c)
[ 16.293933] [<c0d3d04c>] (default_idle_call) from [<c0172b30>]
(do_idle+0x11c/0x158)
[ 16.301709] [<c0172b30>] (do_idle) from [<c0172e68>]
(cpu_startup_entry+0x28/0x30)
[ 16.309310] [<c0172e68>] (cpu_startup_entry) from [<c0d36468>]
(rest_init+0xd4/0xd8)
[ 16.317087] [<c0d36468>] (rest_init) from [<c1400ff8>]
(start_kernel+0x484/0x4b4)
[ 16.324611] ---[ end Kernel panic - not syncing: Attempted to kill init!
exitcode=0x00000100
[ 16.324611] ]---
