- my two next questions would be, how does MIDI in connect and is there a way
to use the switch -p to connect directly to the audio card via ALSA with the
following soundcard info?
something like `beast -p alsa=default` or `beast -p alsa=hw:0`
```
cat /proc/asound/cards
0 [Pro ]: USB-Audio - FastTrack Pro
M-Audio FastTrack Pro at usb-0000:00:1a.0-1.1, full speed
1 [Loopback ]: Loopback - Loopback
Loopback 1
beast --bse-driver-list
the redacted output for beast --bse-driver-list
Available PCM drivers:
Devices (Output):
> dmix:CARD=Pro,DEV=1 - FastTrack Pro, USB Audio #1 Direct sample
mixing device
> dsnoop:CARD=Pro,DEV=1 - FastTrack Pro, USB Audio #1 Direct sample
snooping device
> hw:CARD=Pro,DEV=1 - FastTrack Pro, USB Audio #1 Direct hardware
device without any conversions
> plughw:CARD=Pro,DEV=1 - FastTrack Pro, USB Audio #1 Hardware device
with all software conversions
Devices (Pro - M-Audio FastTrack Pro at usb-0000:00:1a.0-1.1, full speed):
> hw:0,0 - subdevices: 1*playback + 1*capture (1 busy)
> hw:0,1 - subdevices: 1*playback (1 busy)
Devices (Loopback - Loopback 1):
> hw:1,0 - subdevices: 8*playback + 8*capture
> hw:1,1 - subdevices: 8*playback + 8*capture
null null=[nosleep]
Available MIDI drivers:
Devices (Duplex):
> hw:CARD=Pro,DEV=0 - FastTrack Pro, FastTrack Pro Direct rawmidi
driver device
Devices (Pro - M-Audio FastTrack Pro at usb-0000:00:1a.0-1.1, full speed):
> hw:0,0 (subdevices: 1*input + 1*output)
null
```
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/tim-janik/beast/issues/92#issuecomment-471337847_______________________________________________
beast mailing list
[email protected]
https://mail.gnome.org/mailman/listinfo/beast
