Charles D Hixson wrote: > OK, lets try again, this code: > > | fil lin n | > Transcript cr; show: (SmalltalkImage current platformName). > fil := FileStream fileNamed: 'aising/data/technologies.csv' . > Transcript cr; show: (fil detectLineEndConvention). > Transcript cr; show: 'LineEndConvention = '; show: fil > detectLineEndConvention. > fil position: 0. > n := 0. > [fil atEnd] whileFalse: > [ lin := fil nextLine. > n := n + 1. > Transcript cr; show: 'lin '; show: n; show: ' = '; show: lin. > ]. > Transcript cr; show: 'normal end after '; show: n; show: ' lines'. > > results in this output: > > unix > nil > LineEndConvention = nil > lin 1 = 'technology' > 'id' 'name' 'cost1' 'cost2' 'cost3' 'pre1' > 'pre2' 'pre3' 'danger' 'typeName' 'typeValue' > 1 'Autonomous Vehicles' 40000 1000 0 27 16 0 > > ... > 41 'unknown' 1000000000 10000000000 0 41 0 0 > 0 0 > > normal end after 1 lines > > Note the: "normal end after 1 lines" at the end. Note the only the > first line of the response includes the preface "lin # =" that the code > is supposed to be generating on a per line basis. Note the > "LineEndConvention = nil". This time I didn't elide any of the output, > but the stuff in the middle is probably ignorable, it's only the start > and the end of the result that are significant. > Just in case I went back to a vanilla image...nothing imported from Squeak map, no classes defined by me. Plain. (Deleted all the images, changes, etc. and re-extracted from the tarball.) This made no difference.
_______________________________________________ Beginners mailing list Beginners@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/beginners
