List,
I have a problem where I need a while loop to go through a config file
change the remote IP address every time it finds it. There is blank
line after each cfg part. I also need it to check to make sure that the
data always starts with...
Tunnel Name,
IP tunnel
Remote IP
I suppose I would do some thing like the following....
sub read_config() {
open CFGFILE, "<$cfg";
while ($line=<STDIN>) {
chomp $line;
@line=split(/=/, $line);
$config{$line[0]}=$line[1];
#If the blocks do not follow rules like Tunnel Name then
die with error <--- but how would I go aboout doing this?
}
close CFGFILE;
}
Config file....
Tunnel Name, Test1
IP tunnel,192.168.0.1
Remote IP,150.101.1.1
Tunnel Name, Test2
IP tunnel,192.168.0.6
Remote IP,150.101.1.6
==============================
VINTEK CONSULTING PTY LTD
(ACN 088 825 209)
Email: [EMAIL PROTECTED]
WWW: http://www.vintek.net
Tel: (08) 8523 5035
Fax: (08) 8523 2104
Snail: P.O. Box 312
Gawler SA 5118
==============================
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
