This is the result of the ifconfig -a:
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4>mtu8232 index1
inet 127.0.0.1 netmask ff000000
hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 128.169.76.38 netmask ffffff00 broadcast 128.169.76.255
ether 8:0:20:90:c6:63
and my /etc/hosts file looks like this:
127.0.0.1 localhost
128.169.76.38 chekov.it.utk.edu chekov loghost
Thanks, J
KENDER, TED (AIT) wrote:
> Add '127.0.0.1 localhost' to your /etc/hosts file. And then make sure that
> you have an entry matching the contents of /etc/hostname.*, for each active
> interface shown in 'ifconfig -a', which appears that you do since you can
> get to the network at all. The loopback (lo0 in Solaris 2.6) in 'ifconfig
> -a' should show 127.0.0.1.
>
> Ted
>
> -----Original Message-----
> From: HURT, CHRIS [Non-Pharmacia/1000] [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, March 12, 2002 11:45 AM
> To: '[EMAIL PROTECTED]'; [EMAIL PROTECTED]
> Subject: RE: DNS question
>
>
> - What version of bind are the nameservers running (I'm thinking you're not
> in "the view" maybe)
> - check for hidden characters in resolv.conf (vi - :set list)
> - but the messages indicate that nslookup can't talk to the defaults - run a
> "nslookup somehostname nameserverip" and see if it returns the same error.
> If it does - it can't talk to the nameservers (is the nameserver listening
> on that interface maybe?)
>
> HTH,
> Chris
>
> -----Original Message-----
> From: Joyce Harris [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, March 12, 2002 10:38 AM
> To: HURT, CHRIS [Non-Pharmacia/1000]; [EMAIL PROTECTED]
> Subject: Re: DNS question
>
>
> Yes. Ping works fine. I can reach the servers and I can do nslookup
> through these name servers from other servers.
>
> Joyce
>
> HURT, CHRIS [Non-Pharmacia/1000] wrote:
>
>> Can you reach those IP addresses (ping, etc) from the box in question?
>>
>> -----Original Message-----
>> From: Joyce Harris [mailto:[EMAIL PROTECTED]]
>> Sent: Tuesday, March 12, 2002 10:20 AM
>> To: '[EMAIL PROTECTED]'
>> Subject: DNS question
>>
>>
>> Ok,
>>
>> I know this is not the list to send this to, but it is the most
>> responsive list. I have a DNS question. I just installed Solaris 8 on
>> one of our servers. I reconfigured the network files back to the way
>> they were originally. This is a copy of my /etc/resolv.conf file:
>>
>> domain it.utk.edu
>> nameserver 160.36.0.66
>> nameserver 160.36.128.66
>> nameserver 128.169.50.100
>>
>> When I do an nslookup I get the following error:
>> ***Can't find server name for address 127.0.0.1: No response from server
>> *** Default servers are not available
>>
>> It doesn't seem like it looks for the name servers in the resolv.conf
>> file. Am I missing something?
>>
--
��ࡱ�
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
