copy paste dari sini: http://www.pcreview.co.uk/forums/thread-1148096.php
Question: I must have done something wrong with the settings in my computer because Access 2003 is not functioning properly. There are no wizards anymore. All my databases with a wizard made switchboard form as the startup form don't open. Also when I try to use the toolbox with the wizard activated it doesn't work. I get a message which says (among other things) to check the Control Wizards subkey or the Libraries key in my database's section of the Windows Registry to verify that they are listed and are available. I am not familiar with Windows. How do I do this? I am using Windows XP Professional. Any help will be greatly appreciated. The Answer: Make sure first that you have the latest version of JET installed, see How To: Obtain the Latest Service Pack for the Microsoft Jet 4.0 Database Engine http://support.microsoft.com/defaul...kb;en-us;239114 If applying latest JET service pack does not work then attempt to re-register the following files using "regsvr32.exe" accwiz.dll dao360.dll The way you use "regsvr32.exe" is as follows: - Click Start > Run and type regsvr32 "full path of the file name" - Click OK I hope this helps! If you have additional questions on this topic, please respond back to this posting. ----- Original Message ----- From: Harry siswanto To: belajar-access Sent: Tuesday, November 11, 2008 10:25 Subject: [belajar-access] Error tidak bisa buat Wizard Dear senior., Ada problem di Client saya, karena accessnya (2003) tidak bisa buat Wizard. (di Table, Query, Form) sudah dicoba dengan; 1. Buat File MDb baru, tetap tdk bisa buat Wizard 2. Repair MsOffice 2003; Wizard masih tidak berfungsi... terlampir Error Msgnya.. ada yg bisa bantu ??? terima kasih atas perhatian dan kerjasamanya harry
