Hi,
Am 12.07.2006 um 00:36 schrieb Ernesto Gamez:
hi, Reuti,,, and all,,
Thanks for help me,
Well, I just in my nodes and master node wrote: "ssh-keygen -t rsa"
for get the public key and later I configured this, I open the file
rc.conf to write sshd_enable="YES".
I can log to all nodes, only with: ssh <ip address node>, but I
have problems with the tstmachines, then I open the file,
inetd.conf to enable the lines:
shell stream tcp nowait root /usr/
libexec/rshd rshd -n -l -4
login stream tcp nowait root /usr/
libexec/rlogind rlogin
later I open the files hosts and hosts.equiv to wrote the IP
address, for all my nodes,
and I created the file .rhosts in home, and I wrote the same Ip's,
I change the line the "permitrootlogin yes" in the file, /etc/ssh/
sshd_config
unless you really want to run programs as root, I wouldn't recommend
to allow root login at all with ssh. Better is to have to login as a
user first, and then su to root.
If you use rsh, you also don't need any passwordless ssh login. After
putting all the nodes in all /etc/hosts.equiv the rsh should allow
already a passwordless login to the nodes. With setting
P4_RSHCOMMAND, it will target compiled programs.
The tstmachines is just a script, where the to be used rsh-command is
mentioned in the beginning of the script. Maybe you can change it
there directly.
<snip>
works, it's time to run a program on the cluster.
----------------------------------------------------------------------
--------------------------
I'm not compiled nothing this,
"export P4_RSHCOMMAND=rsh"
Now, I'm reading about this,...
/usr/local/mpich-1.2.7/bin
# export P4_RSHCOMMAND rsh
export:command not found
Itry this line
# setenv P4_RSHCOMMAND rsh
and is ok, but I have the same problems with the tstmachines...
Well, yes - different shell. - Reuti
_______________________________________________
Beowulf mailing list, [email protected]
To change your subscription (digest mode or unsubscribe) visit
http://www.beowulf.org/mailman/listinfo/beowulf
