moved (keep getting kicked out of the space I'm using), I end up with any number of different problems.
debugging is mainly about breaking down the system into components whose correctness can be observed separately.
Personally I suspect some type of hardware issue (this equipment is about 5 years old), but one of my co-workers isn't so sure hardware is in play. I was having problems with the RAID initializing after one move back which I resolved a while back by reseating the RAID controller card.
sounds a bit blackmagic to me. I don't believe I've ever had a problem solved by card reseating (though dimm reseating does seem to clean up 40% of of the nodes I see that are reporting a lot of corrected ecc's.)
This time It appears that the file system & configuration databases became corrupted after moving the equipment. Several services aren't starting up (LADP, DHCP, PBS to name a few) and YAST2 hangs any time an attempt is made
simplify. to me, it sounds like your network (ip, route, dns) is confused. _______________________________________________ Beowulf mailing list, [email protected] To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
