Have done some preliminary tests on the system. Indicates a CPU temperature
of 60-65 C after half an hour (will do longer test soon). Have a few
that's pretty hot. some servers will shutdown at 65 (our DL145g2's,
for instance). of course, the metric is poorly defined: is that a
thermister under the CPU, or a sensor on the die itself?
* How high cpu temperatures are acceptable (our cluster is built on 6 core
AMD opterons)?
well, you can look up the max operating spec for your particular chips.
for instance, http://products.amd.com/en-us/OpteronCPUResult.aspx
shows that OS8439YDS6DGN includes chips rated 55-71. (there must be some
further package marking to determine which temp spec...)
I know life span is reduced if temperature is high, but due to
performance reasons life span of a CPU is pretty short anyway.
if you operate the chip within spec, you should expect the lifespan
to be plenty long (basically indefinite, but let's say 10 years...)
* I used lm-sensors to check the temp, how accurate is that?
it's just reporting registers; that is not to say that lm-sensors is
necessarily interpreting them correctly. otoh, lm_sensors appears to
be willing to offer some metadata, as well (critical temp settings.)
* Would there be a market potential for a system like this? I naturally tend
the more specialized the product, the smaller the market. there are lots
of mainstream workstations which are fairly quiet. I've even seen some
small deskside clusters that claimed to be quiet. personally I don't
think it makes much sense - I'd rather use an arbitrarily-noisy cluster
from a quiet and wimpy desktop.
_______________________________________________
Beowulf mailing list, Beowulf@beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit
http://www.beowulf.org/mailman/listinfo/beowulf
