Sometimes there is an option like "enable IPMI over network". But you're saying other things like power control over IPMI already works from a remote host?
Have you tried asking your vendor for support? On Tue, Aug 30, 2016 at 11:38 AM Michael Di Domenico <[email protected]> wrote: > i'm trying to get SOL working on a Tyan motherboard using freeipmi. > but everything i run seems to give me "username invalid" when > connecting remotely. i can run corresponding ipmitool commands and > they work fine and even if i run bmc-info on the box locally it works. > it's only when i try to run bmc-info/ipmiconsole/etc from a remote box > that i get the error. > > i've checked the username/password its correct and i can connect to > the SOL interface using ipmitool so i'm pretty sure that everything i > have is setup correctly. > > there must be something odd about connecting over the network that > messes everything up. i tried several of the workarounds listed in > the manpage, but they didn't work > > any other thoughts? > _______________________________________________ > Beowulf mailing list, [email protected] sponsored by Penguin Computing > To change your subscription (digest mode or unsubscribe) visit > http://www.beowulf.org/mailman/listinfo/beowulf >
_______________________________________________ Beowulf mailing list, [email protected] sponsored by Penguin Computing To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
