On 01-Sep-2016 10:14, mathog wrote:
Found a manual for a poweredge and the BIOS apparently has a setting
that in one state lets the BIOS control the CPU speeds, and in the
other lets the OS do it. I bet it must be in the first state on those
two Poweredges. What does that setting do with respect to fan speed
control though?
Just a quick note to complete this thread, in case somebody stumbles
onto it with a search.
The BIOS was indeed in the "Active Power Control" state, in which the
BIOS controls everything. Changed the overall power to "custom" and the
CPU setting to "OS Control" and then cpu_freq worked as expected. MHz
scale up and down correctly with load, and the CPU speed when idle is
now only 1197, so it should use less power than before.
There are only two BIOS power settings for the fan: minimum power and
maximum performance. In the former the machine is very reluctant to
increase the fan speed from 1200Hz. Loaded 7 of the 8 threads with:
dd if=/dev/zero of=/dev/null &
and it drove the 4 CPU temperatures up from 27C to 65C. Let it sit
there for a few minutes and the fan did not budge from the 1200Hz it had
started at. The fan can go faster, when the machine powers on the fan
is really loud, then it slows down. Apparently some Dell's have a fan
setting "Maximum Air Exhaust Temperature" which limits exhaust to 50C,
however that option isn't present on the PowerEdge T310. The exhaust
didn't feel nearly that hot even with the dd's running because the
ambient is only 21C and this cool air is diluting the hot air coming off
the processors. Unclear at present how hot the innards of the T310 must
get before the fan speed will increase.
Regards,
David Mathog
[email protected]
Manager, Sequence Analysis Facility, Biology Division, Caltech
_______________________________________________
Beowulf mailing list, [email protected] sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit
http://www.beowulf.org/mailman/listinfo/beowulf
