Sami,
My two cents ;) These constraints will most likely be managed
by the SP in an orthogonally from the creating of PWs.. At least that would be
my approach.. So, goes something like, service requested, check available
resources ( BW, Ports, latency, etc… ) select endpoints that meet the criteria.
Jim Uttaro
From: BESS [mailto:[email protected]] On Behalf Of Jeffrey (Zhaohui) Zhang
Sent: Friday, May 27, 2016 5:41 PM
To: Sami Boutros <[email protected]>
Cc: [email protected]
Subject: Re: [bess] FW: WG Last Call (including implem status & shepherd) for
draft-ietf-bess-evpn-vpws-03
Hi Sami,
I thought about this BW topic further, and have the following question:
- Even for the originally stated purpose, i.e. for PE1 to request PE2 to
request BW reservation in the network, why does it have to be signaled from
PE1? Why can’t you provision PE2 to request that BW reservation? You need to
provision service identifier on both PE1 and PE2 anyway, so you might as well
add BW provisioning on PE2.
I understand that draft-boutros-bess-evpn-vpws-service-edge-gateway-02 does
specify that the service node could skip the service identifier configuration
and automatically signals the one that it receives from the access node. In
that case, signaling qos/bw parameters from the access node makes sense (in
that there is no need for configuration on the service node side).
So, perhaps the entire BW or shaping signaling stuff could be moved from the
base EVPN-VPWS draft to draft-boutros-bess-evpn-vpws-service-edge-gateway?
Jeffrey
Sami: The issue here is that we are using the BW idr draft, and there is no
shaping defined there, and we don’t plan to define a new attribute for this,
perhaps we can add that to a new draft?
Zzh2> Good point that BW is not equal to shaping parameters; however, existing
PW specifications do not seem to have BW related stuff and one actual customer
use case I am aware of with EVPN VPWS actually does involve shaping; so maybe
it’s better to take care of this in the base spec? It’s just a new attribute
anyway.
_______________________________________________
BESS mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/bess