Hi Siddhesh, wrt point #3, my point is that there is no guarantee that a given RR vendor implement/support this opaque route. Even if they do, it will take an update to get this feature. For the update of RR, the provider (cloud, sp, Enterprise) has a process in place. This same process that is used for RR upgrade to support this opaque route, can be used to support new routes. I understand that with the opaque route, you upgrade once and the subsequent new routes can be supported transparently but how often do you we introduce new routes. Furthermore, it is better to have a new routes that has multi-vendor interop support than the one that doesn’t have. Do you know of any providers that says I am OK with vendor lock-in?
If you look at the history here, we have done pretty well with collaborating together and coming up with the new routes that has multiple vendor support from the beginning. All EVPN route types from RT-5 onward fall into this category. With SD-WAN related stuff, you can come with a single extensible route that is future proof (in terms of RR). I am just concern that introduction of opaque route will open a Pandora’s box that cannot be closed. Cheers, Ali From: Siddhesh Dindorkar <[email protected]> Date: Wednesday, August 28, 2019 at 2:43 PM To: Cisco Employee <[email protected]> Cc: Stephane Litkowski <[email protected]>, "[email protected]" <[email protected]> Subject: Re: [bess] WG adoption call and IPR poll for draft-rabadan-bess-vendor-evpn-route-07 Hi Ali, thanks for the detailed comments. We understand your view and those were the discussion points within us as well. However, in reference to your RR point #3, one of the reason for a vendor specific evpn route type is to be able to do prototyping within small scale deployements which use other vendor RRs. Even if we have RFCs for new route types, other vendors may not implement them if they dont need those usecases and/or is not a release priority. Hence again comes the restriction in using other vendor RR until the new route type is implemented by the RR vendor. Best, Siddhesh On Tue, Aug 27, 2019 at 3:27 PM Ali Sajassi (sajassi) <[email protected]<mailto:[email protected]>> wrote: Hi Jorge, I will support this draft if it is modified to specify the routes for SD-WAN application specifically as opposed to have an opaque route. My concerns are the following: 1. The main idea of standardization is interoperability among vendors and this draft doesn’t give us that. 2. Also I don’t think having such a draft can facilitate prototyping. This draft has been around for several years and your prototyping should have been independent of this draft since I am not aware of any other major vendor implemented or deployed this draft. 3. Even if this draft becomes an RFC, there is no guarantee that in a given network the RR will be compliant with it as we have experienced such things first hand in the field 4. Making dependency of an IETF draft on IEEE process is not a good thing – i.e., an new vendor that wants to implement it now needs to apply for an IEEE OUI. OUI gets allocated to the vendor with Ethernet PHY for MAC addresses and not as route distinguisher. I am not sure how IEEE will look at this. Have you discussed your application with them (e.g., OUI for non-related Ethernet PHY/MAC) 5. RR can be used as store and forward mechanism for data that didn’t use BGP before. I have already seen that some people want to use BGP for passing configuration, stats, diagnostics info, etc. With now defining an opaque route, there will be no check on the contents of the route and anyone can put anything they want even if it is not best suited to do them in BGP. So, frankly, I don’t see any positives here but just negatives. Can you replace the opaque route with the actual routes. At the end of the day, we have to do it for multi-vendor interop anyway. So, the sooner, the better. If single-vendor deployment is sufficient which is typically the case for Enterprises, then there is no need to standardize such draft. Cheers, Ali From: BESS <[email protected]<mailto:[email protected]>> on behalf of Stephane Litkowski <[email protected]<mailto:[email protected]>> Date: Tuesday, August 20, 2019 at 2:16 AM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: [bess] WG adoption call and IPR poll for draft-rabadan-bess-vendor-evpn-route-07 Hi, This email begins a two-weeks WG adoption poll for draft-rabadan-bess-vendor-evpn-route-07 [1] Please review the draft and post any comments to the BESS working group list. We are also polling for knowledge of any undisclosed IPR that applies to this Document, to ensure that IPR has been disclosed in compliance with IETF IPR rules (see RFCs 3979, 4879, 3669 and 5378 for more details). If you are listed as an author or a contributor of this document, please respond to this email and indicate whether or not you are aware of any relevant undisclosed IPR, copying the BESS mailing list. The document won't progress without answers from all the authors and contributors. Currently, there are no IPR disclosures against this document. If you are not listed as an author or a contributor, then please explicitly respond only if you are aware of any IPR that has not yet been disclosed in conformance with IETF rules. This poll for adoption closes on 2nd September 2019. Regards, Stephane and Matthew [1] https://datatracker.ietf.org/doc/draft-rabadan-bess-vendor-evpn-route/ _______________________________________________ BESS mailing list [email protected]<mailto:[email protected]> https://www.ietf.org/mailman/listinfo/bess
_______________________________________________ BESS mailing list [email protected] https://www.ietf.org/mailman/listinfo/bess
