I did some research and theseare the main RFCs for MVPN and how based they map to CISCO profiles and you do the same for Juniper and Huawei.
The 1st two are for mLDP w/ BGP-AD pim (in band) or bgp (out of band)c-signaling UI-PMSI (uni directional inclusive provider multicast service instance) Cisco Default MDT for PIM SM or SSM MI-PMSI (multi directional provider multicast service instance) CISCO Default MDT for PIM SM or SSM S-PMSI (Selective Provider multicast service instance) CISCO Data MDT for PIM SM or SSM PIM dense mode MVPN not supported - I don’t think anyone uses dense these days https://tools.ietf.org/html/rfc6513 MVPN https://tools.ietf.org/html/rfc6514 MVPN https://tools.ietf.org/html/rfc6037. Rosen PIM GRE https://tools.ietf.org/html/rfc4875 P2MP TE Sent from my iPhone > On Sep 28, 2019, at 11:58 AM, Gyan Mishra <[email protected]> wrote: > > BESS WG / All > > I am trying to find a list of all MVPN profiles that are supported by Cisco > and Juniper and Huawei SP router vendors. > > Below link shows what CISCO supports most of which I believe are a CISCO > proprietary and non standard so won’t work between vendors. > > > https://www.cisco.com/c/en/us/support/docs/ip/multicast/200512-Configure-mVPN-Profiles-within-Cisco-IOS.html > > Thank you > > Gyan Mishra > Verizon Communications > Cell 301 502-1347 > > Sent from my iPhone
_______________________________________________ BESS mailing list [email protected] https://www.ietf.org/mailman/listinfo/bess
