Gyan:
+1 to Roberts comments. Robert, Linda and I have taken this topic off line. If you are interested, ping. Sue From: Idr [mailto:idr-boun...@ietf.org] On Behalf Of Gyan Mishra Sent: Tuesday, March 31, 2020 9:52 PM To: Robert Raszuk Cc: i...@ietf.org; Linda Dunbar; Huaimo Chen; bess@ietf.org Subject: Re: [Idr] Seeking feedback of draft-dunbar-idr-sdwan-port-safi using SDWAN SAFI to encode SDWAN Instance ID in the NLRI Thanks Robert!! 👍 For me to really comprehend I have to have to put the tire to the road and test in my Dev lab. Any caveats with Cisco XR? Ping me off list on cisco specific reply. Kind regards Gyan On Tue, Mar 31, 2020 at 6:43 AM Robert Raszuk <rob...@raszuk.net> wrote: Hi Gyan, As topic 1 - Extended community which is used for filtering incoming updates can be configured under BGP AF - there is nothing in the protocol which mandates that such RTs need to be configured under VRF section. As of topic 2 - This is huge misconception by many people who think that SAFI 128 requires MPLS transport. So let me clearly state that SAFI 128 application can happily run for many years now over pure IP transport. VPN labels and transport paradigm are completely separate.. Hint: RFC7510 or RFC4023. Moreover - let me also state that MPLS transport does not bring any benefits other then few bits savings in the packet header as compared with say IPv4 transport. Contrary it costs a lot of complexity in the control plane and forwarding planes of the network elements. Thx, R. On Tue, Mar 31, 2020 at 7:48 AM Gyan Mishra <hayabusa...@gmail.com> wrote: Robert & Linda Sorry to inject myself into this thread. You stated that that RFC 4364 SAFI 128 for vpnv4 vpnv6 is the BGP control plane service layer overlay from PE to RR. Agreed. By default all PEs including the SDWAN PE have RT Filtering enabled by default and only import the RT into the VRF at the control plane level if the VRF is configured with RT advertised by the RR is being imported by the PE, if not the SAFI 128 prefixes are dropped. So I understand that the BGP updates is a control plane function, but how would the routes get imported by the PE if the VRF is not defined on the PE. RFC 4684 RTC capability allows only the RTs imported on the PE to be advertised by the RR to reduced the SAFI 128 route advertised by the RR that would result in being filtered on the PE. So how would that work using SAFI 128 RT to provide the network slicing for SDWAN without VRF configured. Also you mentioned that SAFI 128 L3 vpn services overlay can run over any underlay and that does not have to be MPLS based. I know SAFI 128 works with SR-MPLS but there you are reusing the MPLS data plane. With SRv6 due to PM draft signaling by egress PE for end.dx instantiation, so there is not any service label necessary as is with MPLS and thus SAFI 128 works with SRv6. How would SAFI 128 work with IP underlay used with SDWAN? Even with inter-as option b c ab, with BGP LU you do have topmost label which is via BGP labeled unicast. For inter as options if SAFI128 would work w/o BGP LU you could just run SAFI 128 over IP. I have never tried but I think the control plane would come up but the data plane would be broken. Kind regards Gyan On Tue, Mar 24, 2020 at 9:26 PM Linda Dunbar <linda.dun...@futurewei.com> wrote: Robert, Want to confirm the following two points with you. Do I interpret your words correctly? * If a CPE supports traditional VPN with multiple VRFs, and supports multiple SDWAN instances, the traditional VRF configuration is still same which are carried by BGP Route Target Extended community. * For the SDWAN Instances supported by the same CPE, we can use Extended Community with a different name (say SDWAN Target ID). When the SDWAN Target ID is used, the SAFI 128 can be used for routes for the SDWAN instance, with the exception that the label in the NLRI is not the MPLS label carried by the data packets . Thank you. Linda Dunbar From: Robert Raszuk <rob...@raszuk.net> Sent: Tuesday, March 24, 2020 3:32 AM To: Linda Dunbar <linda.dun...@futurewei.com> Cc: Huaimo Chen <huaimo.c...@futurewei.com>; i...@ietf.org; bess@ietf.org Subject: Re: [Idr] Seeking feedback of draft-dunbar-idr-sdwan-port-safi using SDWAN SAFI to encode SDWAN Instance ID in the NLRI Hi Linda, Nope you do not need VRFs. RT construct works at the control plane level. VRF may be useful for traffic separation purposes on multitenant CPEs or if you would like to relax requirements for unique IP across SDWAN sites - but not a must otherwise. My main point was that BGP SAFI 128 gives you for free transport for multiple routing contexts so why not leverage it as is? Moreover you may suddenly also discover that RTC (RFC4684) is your SDWAN friend too. Many thx, R. On Tue, Mar 24, 2020 at 5:15 AM Linda Dunbar <linda.dun...@futurewei.com> wrote: Robert, Thank you very much for the feedback. If using your suggested Route Target approach to represent the SDWAN Instance ID, does it mean that a SDWAN Edge has to use the same approach to configure the VRF for SDWAN instances? If the edge node supports both traditional VPN and SDWAN, will it cause confusion for RT to represent both? RT is encoded in the Extended_Communities Path Attribute, SAFI 128 is encoded in the MP_REACH_NLRI Path Attribute. What do you mean by saying “different name to Route target(s) carried in the SAFI 128”? Do you mean having a different name (say SDWAN_Target) in Extended_Communities Path Attribute, and have MP_REACH_NLRI Path Attribute including the SAFI 128? SDWAN Instance ID is for the control Plane, not to be carried by the data packets. SAFI 128 for VPN has the Label encoded in the NLRI field that is to be carried by the data packets. But SDWAN Instance ID is not carried by the Data Packets. Is it correct? Thank you. Linda From: Robert Raszuk <rob...@raszuk.net> Sent: Monday, March 23, 2020 2:28 PM To: Linda Dunbar <linda.dun...@futurewei.com> Cc: Huaimo Chen <huaimo.c...@futurewei.com>; i...@ietf.org; bess@ietf.org Subject: Re: [Idr] Seeking feedback of draft-dunbar-idr-sdwan-port-safi using SDWAN SAFI to encode SDWAN Instance ID in the NLRI Hi Linda, I think you are mixing data plane and control plane. In SDWAN data plane is of no issue as you are interconnecting sites in a given VPN over mesh of secure tunnels. You are asking how to keep control plane separate between VPN instances. This is precisely what RFC4364 does already and RT import/export is used to indicate the instance which given set of reachability belongs. Why to reinvent the wheel and do something new just for the heck of it :) ? To be original you can at best invent a different name to Route target(s) carried in the SAFI 128 but let's keep the mechanism the same. That would be my suggestion. Kind regards, R. PS. While this is obvious for some many folks are still confused. RFC4364 does not need to run over MPLS data plane. It can run over IPSec or over DTLS or over UDP/IP just fine. On Mon, Mar 23, 2020 at 6:47 PM Linda Dunbar <linda.dun...@futurewei.com> wrote: IDR experts: SDWAN is an overlay network arching over multiple types of networks. A SDWAN edge node may need to map client traffic to different SDWAN network instances (or segmentations). It might not be feasible to use the AS number in the BGP message to differentiate the SDWAN network instances as multiple SDWAN instances may share the same AS number. We would like to hear feedback from IDR group on using similar method as Binding MPLS Labels to Address Prefixes [RFC8277] to bind SDWAN Instance ID to prefixes. When MPLS VPN SAFI (=128) is present, MPLS label is carried by NLRI [RFC8277] as: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Length | Label |Rsrv |S| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Prefix ~ ~ | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Figure 2: NLRI with One Label We would like to propose the SDWAN Instance ID being encoded in the Label field as follows when SDWAN SAFI (=74 allocated by IANA) is used,: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Length | SDWAN Instance ID (Label) |Rsrv |S| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Prefix ~ ~ | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ NLRI with SDWAN Instance ID. Greatly appreciate any comments or other suggestions... Thank you, Linda Dunbar From: Huaimo Chen <huaimo.c...@futurewei.com> Sent: Monday, March 23, 2020 9:14 AM To: Linda Dunbar <linda.dun...@futurewei.com>; i...@ietf.org Cc: bess@ietf.org Subject: Re: [Idr] FW: Is there any problem of using Private AS as "Identifier" to differentiate SD-WAN Segmentation for draft-dunbar-bess-bgp-sdwan-usage? Hi Linda, It seems that using another SAFI is a possible solution. Best Regards, Huaimo _____ From: Linda Dunbar <linda.dun...@futurewei.com> Sent: Friday, March 20, 2020 12:54 AM To: Huaimo Chen <huaimo.c...@futurewei.com>; i...@ietf.org <i...@ietf.org> Cc: bess@ietf.org <bess@ietf.org> Subject: RE: [Idr] FW: Is there any problem of using Private AS as "Identifier" to differentiate SD-WAN Segmentation for draft-dunbar-bess-bgp-sdwan-usage? Huaimo, Thank you very much for the suggestion. Do you mean using the similar approach as VPN Label carried by NLRI Path Attribute [RFC8277] for SDWAN Segmentation Identifier? If yes, the UPDATE message should not use the MPLS VPN SAFI (=128) to avoid confusion, right? Linda From: Huaimo Chen <huaimo.c...@futurewei.com> Sent: Thursday, March 19, 2020 6:45 PM To: Linda Dunbar <linda.dun...@futurewei.com>; i...@ietf.org Cc: bess@ietf.org Subject: Re: [Idr] FW: Is there any problem of using Private AS as "Identifier" to differentiate SD-WAN Segmentation for draft-dunbar-bess-bgp-sdwan-usage? Hi Linda, It seems that a label may be used as an "Identifier" to differentiate SD-WAN Segmentation. Best Regards, Huaimo _____ From: Idr <idr-boun...@ietf.org> on behalf of Linda Dunbar <linda.dun...@futurewei.com> Sent: Thursday, March 19, 2020 1:22 PM To: i...@ietf.org <i...@ietf.org> Cc: bess@ietf.org <bess@ietf.org> Subject: [Idr] FW: Is there any problem of using Private AS as "Identifier" to differentiate SD-WAN Segmentation for draft-dunbar-bess-bgp-sdwan-usage? BGP Experts, Do you know if there is any problem of using Private AS as "Identifier" to differentiate SD-WAN Segmentation? Here is the discussion in BESS WG. Want to get IDR WG feedbacks for this question. Thank you. Linda From: Linda Dunbar Sent: Thursday, March 19, 2020 11:54 AM To: Najem, Basil <basil.na...@bell.ca>; bess@ietf.org Cc: draft-dunbar-bess-bgp-sdwan-us...@ietf.org Subject: Is there any problem of using Private AS as "Identifier" to differentiate SD-WAN Segmentation for draft-dunbar-bess-bgp-sdwan-usage? Based on Basil’s comment on needing an identifier to differentiate SDWAN instances, I added a section to draft-dunbar-bess-bgp-sdwan-usage . Want to hear people’s feedback. 3.1 Requirements 3.1.1Supporting Multiple SDWAN Segmentations The term “network segmentation” is used extensively in SDWAN deployment. In general (and in this document), the “Network Segmentation” is referring to the process of dividing the network into logical sub-networks using isolation techniques on a forwarding device such as a switch, router, or firewall. For a homogeneous network, such as MPLS VPN or Layer 2 network, VRF or VLAN are used to separate network segments. As SDWAN is an overlay network arching over multiple types of networks, it is important to have distinct identifiers to differentiate SDWAN network instances (or segmentations). When different SDWAN network segments do not have their own assigned AS numbers, a very easy way is to use Private AS numbers, in the range of 64512 to 65535, to differentiate different SDWAN segmentations.. When using BGP to control the SDWAN networks, the Private AS numbers are carried by the BGP UPDATE messages to their corresponding RRs. Greatly appreciate any feedback on this description. Is there any scenario that Private AS cannot be used? Thank you very much. Linda Dunbar From: Najem, Basil <basil.na...@bell.ca> Sent: Friday, February 7, 2020 3:02 PM To: Linda Dunbar <linda.dun...@futurewei.com>; bess@ietf.org Cc: draft-dunbar-bess-bgp-sdwan-us...@ietf.org Subject: RE: solicit feedback on draft-dunbar-bess-bgp-sdwan-usage description of using BGP UPDATE messages to achieve SD-WAN Application Based Segmentation Hi Linda; The SD-WAN Segment is part of the SD-WAN fabric; in other words, there could be more than one Segment over a single underlay depending on the design and the business requirements. Each Segment represents a single and an isolated L3 domain; therefore, I suggested that we may need to include the Segment ID in the BGP update messages in order to identify and build the routing the table for each Segment (based on the Segment ID). Hope this helps. Regards; Basil From: Linda Dunbar <linda.dun...@futurewei.com> Sent: February-03-20 10:40 AM To: Najem, Basil <basil.na...@bell.ca>; bess@ietf.org Cc: draft-dunbar-bess-bgp-sdwan-us...@ietf.org Subject: [EXT]RE: solicit feedback on draft-dunbar-bess-bgp-sdwan-usage description of using BGP UPDATE messages to achieve SD-WAN Application Based Segmentation Basil, Thank you very much for the comments. Your suggested wording change will be incorporated in the next revision. As for your suggestion of Segment and Segment ID of a SDWAN node (to be included in the BGP UPDATE), does the “Segment” mean the different Underlay? In the figure below, C-PE1 has 3 WAN ports: 2 to MPLS network and 1 to Public Internet. Do you mean C-PE1 has 3 WAN “segments”? If not, can you elaborate more? Thanks, Linda From: Najem, Basil <basil.na...@bell.ca> Sent: Sunday, February 02, 2020 5:48 PM To: Linda Dunbar <linda.dun...@futurewei.com>; bess@ietf.org Cc: draft-dunbar-bess-bgp-sdwan-us...@ietf.org Subject: RE: solicit feedback on draft-dunbar-bess-bgp-sdwan-usage description of using BGP UPDATE messages to achieve SD-WAN Application Based Segmentation Hello Linda; I haven’t gone through the entire document; however, I have the following quick comments A. Regarding the following paragraph: 1. Augment of transport, which refers to utilizing overlay paths over different underlay networks. Very often there are multiple parallel overlay paths between any two SDWAN edges, some of which are private networks over which traffic can traverse without encryption, others require encryption, e.g. over untrusted public networks. The traffic that traverses the privet networks can be either encrypted or unecrypted (in other words, the assumption that the traffic is NOT encrypted is not always correct). I would change the parpagaph to the following (for clarity): 1. Augment of transport, which refers to utilizing overlay paths over different underlay networks. Very often there are multiple parallel overlay paths between any two SDWAN edges, some of which are private networks over which traffic can traverse with or without encryption, others require encryption, e.g. over untrusted public networks. B. Another thing that we need to discuss is the Segment ID; each Segment (at the SD-WAN Edge) MUST have an ID. The SD-WAN Policy will map the Application Flow to the Segment. Since the Segment is a “routing domain”, the BGP update will be exchanged with the memebers of a particular Segment. As such: Should we include the Segment ID as an attribute in the BGP update messages? Perhaps we need to further discuss this in details. Any feedback is welcomed and it’s highly appreciated. Regards; Basil From: Linda Dunbar <linda.dun...@futurewei.com> Sent: January-31-20 5:17 PM To: bess@ietf.org Cc: draft-dunbar-bess-bgp-sdwan-us...@ietf.org Subject: [EXT]solicit feedback on draft-dunbar-bess-bgp-sdwan-usage description of using BGP UPDATE messages to achieve SD-WAN Application Based Segmentation BESS participants: “SDWAN” networks is characterized by: 1. Augment of transport, which refers to utilizing overlay paths over different underlay networks. Very often there are multiple parallel overlay paths between any two SDWAN edges, some of which are private networks over which traffic can traverse without encryption, others require encryption, e.g. over untrusted public networks. 2. Enable direct Internet access from remote sites, instead hauling all traffic to Corporate HQ for centralized policy control. 3. Some traffic are routed based on application IDs instead of based on destination IP addresses. https://datatracker.ietf..org/doc/draft-dunbar-bess-bgp-sdwan-usage/ <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdatatracker.ietf.org%2Fdoc%2Fdraft-dunbar-bess-bgp-sdwan-usage%2F&data=02%7C01%7Clinda.dunbar%40futurewei.com%7Ce72069277dec49a5666a08d7cfcddf3f%7C0fee8ff2a3b240189c753a1d5591fedc%7C1%7C0%7C637206355463932513&sdata=LtBJOxohSHjupWERqW88kUik96QA8iKzaucSLxh6rSU%3D&reserved=0> describes examples of using BGP UPDATE messages to achieve the SDWAN Application Based Segmentation, assuming that the applications are assigned with unique IP addresses. In the Figure below, the following BGP Updates can be advertised to ensure that Payment Application only communicates with the Payment Gateway: BGP UPDATE #1 from C-PE2 to RR for the RED P2P topology (only propagated to Payment GW node: - MP-NLRI Path Attribute: * 30.1.1.x/24 - Tunnel Encap Path Attribute * IPsec Attributes for PaymentGW ->C-PE2 BGP UPDATE #2 from C-PE2 to RR for the routes to be reached by Purple: - MP-NLRI Path Attribute: * 10.1.x.x * 12.4.x.x - TunnelEncap Path Attribute: * Any node to C-PE2 Your feedback is greatly appreciated. Thank you very much. Linda Dunbar _____ External Email: Please use caution when opening links and attachments / Courriel externe: Soyez prudent avec les liens et documents joints _____ External Email: Please use caution when opening links and attachments / Courriel externe: Soyez prudent avec les liens et documents joints _______________________________________________ Idr mailing list i...@ietf.org https://www.ietf.org/mailman/listinfo/idr <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ietf.org%2Fmailman%2Flistinfo%2Fidr&data=02%7C01%7Clinda.dunbar%40futurewei.com%7Ce72069277dec49a5666a08d7cfcddf3f%7C0fee8ff2a3b240189c753a1d5591fedc%7C1%7C0%7C637206355463932513&sdata=eqN85C344P7RxfO%2FBxoVZ0zNgGBsAcH%2F623Ye6TYHhs%3D&reserved=0> _______________________________________________ Idr mailing list i...@ietf.org https://www.ietf.org/mailman/listinfo/idr -- Gyan Mishra Network Engineering & Technology Verizon Silver Spring, MD 20904 Phone: 301 502-1347 Email: gyan.s.mis...@verizon.com -- Gyan Mishra Network Engineering & Technology Verizon Silver Spring, MD 20904 Phone: 301 502-1347 Email: gyan.s.mis...@verizon.com
_______________________________________________ BESS mailing list BESS@ietf.org https://www.ietf.org/mailman/listinfo/bess
