Hub and spoke EVPN and E-tree are different.

However, draft-ietf-bess-evpn-virtual-hub should address the following two at 
least:

   *  MPLS EVPN can't support hub/spoke usecase, where the spoke PEs can
      only connect to each other through the hub PE.  Especially when at
      least two of the spoke PEs are connected to a common route
      reflector.

   *  MPLS EVPN can't work as an AR-REPLICATOR.  Because the AR-
      REPLICATOR will apply replication for the ingress AR-LEAF too.
      But a packet shoud not be sent back to the AR-LEAF where it is
      received from.

Jeffrey



Juniper Business Use Only
From: BESS <[email protected]> On Behalf Of Alexander Vainshtein
Sent: Thursday, August 20, 2020 9:36 AM
To: [email protected]
Cc: Michael Gorokhovsky <[email protected]>; [email protected]
Subject: [bess] Hub-and-spoke support in EVPN: RFC 8317 vs. 
draft-wang-bess-evpn-context-label-04

[External Email. Be cautious of content]

Dear authors of draft-wang-bess-evpn-context-label-04,

Section 2 "Problem Statement" of draft-wang-bess-evpn-context-label-04 states 
that " MPLS EVPN can't support hub/spoke use case, where the spoke PEs can only 
connect to each other through the hub PE.  Especially when at least two of the 
spoke PEs are connected to a common route reflector".

I have to admit that I do not understand why support of the generic E-Tree 
functionality in EVPN defined in RFC 
8317<https://urldefense.com/v3/__https:/tools.ietf.org/html/rfc8317__;!!NEt6yMaO-gk!QRZOPg7Or-dqLm0vGwqM2vyyPBISCyDo4uu4Jq2MEDW8fuSMZV6tLNIvZnaam81J$>
 is not sufficient for handling this use case.

In particular I do not see why connection of Spoke PEs to a common RR affects 
the EVPN behavior (or L3vPN Hub-and-Spoke VPN behavior as defined in Section 
4.3.5 of RFC 
4364<https://urldefense.com/v3/__https:/tools.ietf.org/html/rfc4364*section-4.3.5__;Iw!!NEt6yMaO-gk!QRZOPg7Or-dqLm0vGwqM2vyyPBISCyDo4uu4Jq2MEDW8fuSMZV6tLNIvZunniYWF$>)
 in any way.

Regards, and lots of thanks in advance,
Sasha

Office: +972-39266302
Cell:      +972-549266302
Email:   
[email protected]<mailto:[email protected]>


________________________________
Notice: This e-mail together with any attachments may contain information of 
Ribbon Communications Inc. that is confidential and/or proprietary for the sole 
use of the intended recipient. Any review, disclosure, reliance or distribution 
by others or forwarding without express permission is strictly prohibited. If 
you are not the intended recipient, please notify the sender immediately and 
then delete all copies, including any attachments.
________________________________
_______________________________________________
BESS mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/bess

Reply via email to