Dear Co-Authors,
Regarding the "ID Length" in the Base (Minimal Set) DIM Sub-TLV, Figure 6 of
draft-ietf-bess-secure-evpn shows the following:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ID Length | Nonce Length |I| Flags |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Rekey |
| Counter |
+---------------------------------------------------------------+
| |
~ Originator ID + (Tenant ID) + (Subnet ID) + (Tenant Address) ~
| |
+---------------------------------------------------------------+
| |
~ Nonce Data ~
| |
+---------------------------------------------------------------+
Figure 6
And the corresponding description is as follows:
"ID Length (16 bits) is the length of the Originator ID + (Tenant ID)
+ (Subnet ID) + (Tenant Address) in bytes. Nonce Length (8 bits) is
..."
Question: Per my understanding, should "ID length (16 bits)" be "ID length (8
bits)"?
Best Regards,
Shunwan
_______________________________________________
BESS mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/bess
