Quick report on my experience with FW37.
Running two SB2s, wireless. Connecting via D-Link DI-624 rev.C over
802.11g, WPA-TKIP. Not using Super-G, Turbo, Enhanced Range or other
proprietary modes. Wireless connection working fine under FW 36 using
4.03 SS6.5b1 nightly.
Installed 4.09 nightly this morning:
6.5b1 - 6863 - Windows XP - EN - cp1252
Updated players to FW37 when prompted. Was unable to reconnect over
wireless using WPA-TKIP.
Tried the following with no luck:
Performed factory reset and re-entered setup information.
Turned on SSID broadcast.
Switched out of g-only mode to b/g mode.
The D-Link logged events for SB2 connections and successful
authentications. The SB2 screens counted down to zero and failed.
Unsecured wireless worked throughout. Did not try WEP. Used unsecured
link to go back to FW36. That's working fine.
--rt
_______________________________________________
beta mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/beta
