Robin Bowes;283180 Wrote: > ....> One other thing I noticed is that for lan_ip_mode, I think > 0=static > > and 1=DHCP.[/color] > > I'll double check that, but I'm pretty sure DHCP=0. > >
I have just performed a test to check this. I set lan_ip_mode=1, performed a save & reset & power cycled the receiver. The receiver flashed red, then green (which indicated that it was looking for a DHCP server) and then blue. I didnt have a DHCP server enabled on my network, so it allocated itself a private address on a different subnet. Needless to say, without using your config tool, you cant see what the private address is!. Using your utility, this confirmed the following: lan_ip_mode=1 lan_network_address=169.254.238.53 lan_subnet_mask=255.255.0.0 lan_gateway=0.0.0.0 I then set: lan_ip_mode=0 lan_network_address=192.168.1.29 lan_subnet_mask=255.255.255.0 lan_gateway=192.168.1.1 ...and did a save_data. I soon as I did this (& without performing a reset or power cycling the receiver/controller), it went to steady white and could be pinged. It also popped up on the controller as a new player. Note: All of these tests were performed using a wired connection - I am still battling with the wireless side (but that isnt the fault of your config utility:-) -- EliteAV ------------------------------------------------------------------------ EliteAV's Profile: http://forums.slimdevices.com/member.php?userid=15932 View this thread: http://forums.slimdevices.com/showthread.php?t=43722 _______________________________________________ beta mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/beta
