Mr. Blunder,

You're perfectly welcome to manufacture your own headlights and
taillights. To make a secondary E6 that will take a taillight, just
start with the E6-OS. It will be switched on and off by the switch on
the DLumotec unless you make your own switch for it. Just be sure to
configure the switch to short the connection, not open the connection
to turn the secondary off. Wire it in series with the DLumotec. With
the DLumotec, the E6-OS reaches high power at a very low speed.

But for folks who don't want to make their own lights, or who want to
be able to switch a Secondary on and off independently, I sell a
Secondary headlight.

The DLumotec Oval Senso Plus is hard wired for use with a hub dynamo.
The headlight's housing is used for several different models of
headlight, some of which are intended for use with sidewall dynamos. A
sidewall dynamo acts as its own on/off switch, so the versions made
for use with sidewall dynamos do not have the switch, and do not have
the hard wire. They do have two pairs of connectors on the underside
of the housing. One pair is used to connect to the sidewall dynamo,
and the other pair is used to connect to the taillight. If you look
closely at the connectors you'll notice that they are really just one
pair, split into two.

The hub dynamo versions, one of which you have, can also be used with
sidewall dynamos, simply by ignoring the switch and the hard wire. The
connectors on the underside completely bypass the switch and the hard
wire.

On Nov 6, 1:52 pm, SocialBlunder <[EMAIL PROTECTED]> wrote:
> Hold the presses!
>
> Where can I get a secondary headlight that has taillight connections?


--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Bicycle Lifestyle" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/bicyclelifestyle?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to