Jeremy, f Thanks for the fast response. I have corrected the path issue to ar. As you pointed out, it was located in /usr/ccs/bin/ar. I made this change with no success. I think you were looking too far up in the log file. Once I changed the variable in configure, the ar error stopped, but I still never get a .out file. Thank you for your help. I'll look around for more issues. You also have the latest log file in my last email. I tried to compile with gcc, forte, & finally studio 12.
Thanks in advance, Mark -----Original Message----- From: Jeremy C. Reed [mailto:[EMAIL PROTECTED] Sent: Friday, September 05, 2008 9:49 AM To: Stone, Mark S. Cc: bind-users@isc.org Subject: RE: Cant get bind 9.5.0-P2 to compile under cc or gcc On Fri, 5 Sep 2008, Stone, Mark S. wrote: > In response to Mark's email, I pasted the config.log file below. What about my email? :) > configure:2419: checking for ar > configure:2452: result: no > configure:2471: error: > ar program not found. Please fix your PATH to include the directory > in which ar resides, or set AR in the environment with the full path to ar. Please consider reading the log messages and attempt to find the answer. Google shows many webpages and threads regarding this. Maybe your ar is at /usr/ccs/bin/ar ? Maybe you don't have the required SUNWbtool package installed? Maybe you need to fix your PATH? CONFIDENTIALITY NOTICE: This E-Mail is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you have received this communication in error, please do not distribute and delete the original message. Please notify the sender by E-Mail at the address shown. Thank you for your compliance.
