Problem is I am specifying the server on the command line, it is supposed to use only that server, not randomly decide because it can't connect to that server to try any others it feels like.
Even the -s option makes no difference. It should even been looking at files or dns.... Duncan > -----Original Message----- > From: Lightner, Jeff [mailto:jlight...@water.com] > Sent: 03 February 2010 15:04 > To: Duncan Berriman; bind-users@lists.isc.org > Subject: RE: Host/nslookup/dig queries wrong server > > > rpm -qa |grep bind > > Will tell you all the BIND packages you have installed via RPM. > > The reason commands check resolv.conf in UNIX/Linux is > typically due to > how you've setup /etc/nsswitch.conf. A line is contained in > it similar > to the following: > hosts: files dns > > The above line says to first check files (/etc/hosts > typically) for the > name and if not found there then try to use dns (/etc/resolv.conf > defines settings for dns lookups). There are other options > for the file > such as nis which would say to look at nis. > > If you don't want to use dns for lookups you can remove "dns" from the > hosts line in nsswitch.conf. > > Note that lookup commands are often designed specifically for name > services so won't necessarily respond from /etc/hosts even if > the entry > is there. The way to verify it's reading /etc/hosts is to do > a ping on > it after the lookup. If the ping works and the lookup appeared not to > then it means it likely found the answer in /etc/hosts. (HP-UX is an > exception - their implementation of nslookup actually retruns entries > from /etc/hosts as well.) > > -----Original Message----- > From: bind-users-bounces+jlightner=water....@lists.isc.org > [mailto:bind-users-bounces+jlightner=water....@lists.isc.org] > On Behalf > Of Duncan Berriman > Sent: Wednesday, February 03, 2010 9:45 AM > To: bind-users@lists.isc.org > Subject: RE: Host/nslookup/dig queries wrong server > > # rpm -q -f `which host` > bind-utils-9.3.6-4.P1.el5_4.2 > > Thanks > Duncan > > > > -----Original Message----- > > From: Stephane Bortzmeyer [mailto:bortzme...@nic.fr] > > Sent: 03 February 2010 13:12 > > To: Duncan Berriman > > Cc: 'Matus UHLAR - fantomas'; bind-users@lists.isc.org > > Subject: Re: Host/nslookup/dig queries wrong server > > > > > > On Wed, Feb 03, 2010 at 11:42:19AM -0000, > > Duncan Berriman <dun...@dcl.co.uk> wrote > > a message of 75 lines which said: > > > > > How do I check which one it is? I can't see any option to tell me. > > > > which host > > rpm -q -f `which host` > > > > -- > > This message has been scanned for viruses and > > dangerous content by MailScanner, and is > > believed to be clean. > > _______________________________________________ > bind-users mailing list > bind-users@lists.isc.org > https://lists.isc.org/mailman/listinfo/bind-users > > Proud partner. Susan G. Komen for the Cure. > > Please consider our environment before printing this e-mail > or attachments. > ---------------------------------- > CONFIDENTIALITY NOTICE: This e-mail may contain privileged or > confidential information and is for the sole use of the > intended recipient(s). If you are not the intended recipient, > any disclosure, copying, distribution, or use of the contents > of this information is prohibited and may be unlawful. If you > have received this electronic transmission in error, please > reply immediately to the sender that you have received the > message in error, and delete it. Thank you. > ---------------------------------- > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > _______________________________________________ bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
