Yes - It's called "views". There are many good examples of BIND Views on the internet and in the documentation.
-----Original Message----- From: bind-users-bounces+jlightner=water....@lists.isc.org [mailto:bind-users-bounces+jlightner=water....@lists.isc.org] On Behalf Of Thomas Elsgaard Sent: Monday, September 27, 2010 9:01 AM To: bind-users@lists.isc.org Subject: DNS resolution based on source network Hello Is it possible with BIND, to resolve the same name (like test.gl) to different IP's based on the source network of the request? Here is an example A machine in network 10.3.0.0/16 is contacting DNS to lookup "test.gl", DNS returns -> 10.0.0.2 A machine in network 10.5.0.0/16 is contacting DNS to lookup "test.gl", DNS returns -> 10.0.0.5 Thomas _______________________________________________ bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users Proud partner. Susan G. Komen for the Cure. Please consider our environment before printing this e-mail or attachments. ---------------------------------- CONFIDENTIALITY NOTICE: This e-mail may contain privileged or confidential information and is for the sole use of the intended recipient(s). If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you. ---------------------------------- _______________________________________________ bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
