On 8 December 2017 at 17:37, Eoin Kim <eoin....@rcst.com.au> wrote: > Hi, > > > Thanks for your help. But is it possible to do it without additional IP > address? I thought that I am not really bad with BIND but as soon as I > started using views, I'm going nowhere [image: 😊] > > > In order for the slave's View A to transfer from the master's View A, and the slave's View B to transfer from the master's view B, there has to be some way for the master to differentiate the two views on the slave and answer their queries from the correct view. Source IP address is the typical way to do that.
You could probably select on source port instead, by setting the slave's transfer-source to a particular port for each view. I've never set this up myself, but I just checked the ARM and it looks like you can use any legal address_match_list in the view's match-clients list, so you could also select on TSIG key used, if you assign per-view TSIG keys.
_______________________________________________ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
