Hi Klaus,
this exact configuration is described in the KB:
https://kb.isc.org/v1/docs/en/aa-00206
But my recommendation is actually to use a dual-stack proxy in front of `named
-4` and use the PROXYv2 protocol to interact with named.
Ondrej
--
Ondřej Surý — ISC (He/Him)
My working hours and your working hours may be different. Please do not feel
obligated to reply outside your normal working hours.
> On 5. 9. 2024, at 18:46, Klaus Tachtler via bind-users
> <bind-users@lists.isc.org> wrote:
>
> Hi,
>
> is it possible to set
> query-source-v6 address { none; };
>
> I would like to make DNS requests via ipv4 and ipv6 to isc bind (incoming)
> from my Internal network.
>
> However, outgoing requests should only be made via ipv4.
>
> This is e.g. necessary in a scenario where a 6in4 tunnel is used for an ipv6
> connection and the DNS responses are too slow.
>
> Thank you for any advice!
>
>
> Greetings
> Klaus.
>
> --
> Diese Nachricht wurde von meinem Android-Gerät mit FairMail gesendet.
>
>
> --
>
> ---------------------------------------
> e-Mail : kl...@tachtler.net
> Homepage: https://www.tachtler.net
> DokuWiki: https://dokuwiki.tachtler.net
> ---------------------------------------
>
> --
> Visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from
> this list
>
> ISC funds the development of this software with paid support subscriptions.
> Contact us at https://www.isc.org/contact/ for more information.
>
>
> bind-users mailing list
> bind-users@lists.isc.org
> https://lists.isc.org/mailman/listinfo/bind-users
--
Visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from
this list
ISC funds the development of this software with paid support subscriptions.
Contact us at https://www.isc.org/contact/ for more information.
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users
