Hi Ondrej,
How are the administrative distances in Bird?
Static Route == 200
OSPF == ?
iBGP == ?
eBGP == 100
* By the way it worked with the two static protocol instances :D. Actually
I think it would be much more simple with :
Router1:
protocol static {
check link;
route 0.0.0.0/0 via GW1;
}
Router2:
protocol static {
check link;
route 0.0.0.0/0 via GW2;
}
and then exchange the static routes in OPSF.
If I use two static protocols in the same configuration, I also need to
send the transfer network between router and ISP to the second router, in
order for the default gateway to be in OSPF.
There exist a switch in OSPF-Bird similar to the "passive interface" from
cisco and brocade?
Greetings,
Daniel
Von: Ondrej Zajicek <[email protected]>
An: Daniel Gomez <[email protected]>
Kopie: [email protected]
Datum: 09.07.2013 10:57
Betreff: Re: Injecting ISP Default Route into OSPF
Gesendet von: [email protected]
On Tue, Jul 09, 2013 at 10:36:13AM +0200, Daniel Gomez wrote:
> My actuall problem is that I cannot see both static defined default
routes
> on the Kernel table, and when I shutdown the outside interface the new
> default route is also not appearing on the routing table.
>
> Any ideas?
Use two static protocol instances, each for one route ;-)
--
Elen sila lumenn' omentielvo
Ondrej 'SanTiago' Zajicek (email: [email protected])
OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net)
"To err is human -- to blame it on a computer is even more so."
[Anhang "signature.asc" gelöscht von Daniel Gomez/ac/synaix]
