On 23/01/2015 01:49 μμ, Ondrej Zajicek wrote:
> On Wed, Jan 14, 2015 at 01:15:10PM +0100, Pavlos Parissis wrote:
>> On 14/01/2015 12:47 μμ, Jeronimo de A. Barros wrote:
>> but my logic was wrongly applied to the conf, it should haven been:
>> protocol bfd {
>> debug { states, routes, filters, interfaces, events };
>> interface "bond0" {
>> min rx interval 400 ms;
>> min tx interval 400 ms;
>> idle tx interval 1000 ms;
>> multiplier 3;
>> };
>> interface "eth*" {
>> disabled yes;
>> }
>> }
>>
>> but I get config error at the line ' disabled yes;'
>
> Hi
>
> There is no 'disabled' option, there is 'passive' option, which does something
> slightly different.
>
> But you don't really need such option, because BFD is active only on
> interfaces
> where internal BFD clients (OSPF, BGP) requested a session. So you could
> configure in OPSF/BGF whether given OSPF interface / BGP session should
> use BFD (option 'bfd').OK great, thanks for the clarification. Cheers, Pavlos
signature.asc
Description: OpenPGP digital signature
