I forgot to mention that my interface ‘784648196’ has an IPv4 scope link address configured like this:
784648196@NONE: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1462 qdisc pfifo_fast master bat0 state UNKNOWN group default qlen 1000 inet 169.254.40.2/21 scope link 784648196 How can I use scope link configurations with BGP in bird4? Thanks again, Amadeus > On 14 Feb 2015, at 12:13, Amadeus Alfa <[email protected]> wrote: > > Hello list, > > in bird6 I can use the following configuration snippet with IPv6 link local > addresses: > > protocol bgp xxx { > neighbor fe80::2ff:c0bb:fe00:1234 % '784648196' as 1234; > }; > > ('784648196' is the interface name) > > My question is now: How can I use IPv4 scope link addresses in bird4? > > When I use the line below I get an error: "Link-local address and interface > scope must be used together" > > protocol bgp xxx { > neighbor 169.254.0.1 % '784648196' as 1234; > }; > > Thanks, > Amadeus
