Thanks for your reply Ondrej, I changed the port range as suggested, confirmed that BFD packets were leaving from a correct port, but the BFD session still stays down.
-- Arzhel On Tue, Mar 5, 2019, at 19:32, Ondrej Zajicek wrote: > On Tue, Mar 05, 2019 at 05:21:44PM -0500, Arzhel Younsi wrote: > > Hi, > > > > I'm trying to setup BFD multihop session between Bird 1.6.3 and a Juniper > > MX router to fast failover eBGP multihop sessions. > > Hi > > I guess this could be strict src port checking in Juniper, see > https://bird.network.cz/?get_doc&v=16&f=bird-6.html#ss6.2 : > > BFD packets are sent with a dynamic source port number. Linux systems use > by default a bit different dynamic port range than the IANA approved one > (49152-65535). If you experience problems with compatibility, please > adjust /proc/sys/net/ipv4/ip_local_port_range > > And also: https://bird.network.cz/pipermail/bird-users/2015-August/009846.html > > -- > Elen sila lumenn' omentielvo > > Ondrej 'Santiago' Zajicek (email: [email protected]) > OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net) > "To err is human -- to blame it on a computer is even more so." >
