On 24.08.20 09:43, Mehdi Rukmawan wrote:
Hello,
I'm just starting bird with vm and i'm running it on gns3.
first of all the ospf is running and can see the routes from he neighbour
as we can see below :
root@gns3:/etc/netplan# birdc show route
BIRD 1.6.3 ready.
1.1.1.1/32 via 192.168.70.1 on ens3 [ospf1 07:36:32] * I (150/6)
[1.1.1.1]
192.168.70.0/30 dev ens3 [ospf1 07:34:53] * I (150/5) [192.168.168.1]
192.168.40.0/30 via 192.168.70.1 on ens3 [ospf1 07:36:32] * I (150/6)
[1.1.1.1]
192.168.10.0/30 via 192.168.70.1 on ens3 [ospf1 07:36:32] * I (150/6)
[1.1.1.1]
192.168.20.0/30 via 192.168.70.1 on ens3 [ospf1 07:36:32] * I (150/6)
[1.1.1.1]
192.168.168.1/32 dev lo [ospf1 07:34:53] * I (150/0) [192.168.168.1]
but i can't see the routes from the machine which is running bird.
is this a bug ? or i have something wrong with ospf configuration ?
root@gns3:/etc/netplan# ip route
169.254.0.0/16 dev ens3 scope link metric 1000
192.168.70.0/30 dev ens3 proto kernel scope link src 192.168.70.2 metric 100
regards,
Hi Medhdi,
Are you looking for
```
bird> show ospf topology
```
?
Because bird has imported and is aware of your routes. You just see them
not in `show routes`. I think this is for all devices routes and alien
routes (if you use "learn" in protocol kernel).
Bernd
