Hi list,
First of all: I'm very sorry if this has been discussed before.
Anyway, we're experiencing possible (configuration) incompatibiliy
between BIRD2 and Mikrotik RouterOS. To be precise, we're on BIRD 2.0.7
and RouterOS 6.48.5 (Level 6).
Configuration snippet from BIRD:
protocol ospf v3 ospf_v6 {
# Do not generate ECMP (equal-cost multipath) routes.
ecmp no;
area 0.0.0.0 {
interface "eth0" {
authentication cryptographic;
password "SOMETHING";
bfd yes;
};
interface "eth1" {
authentication cryptographic;
password "SOMETHINGELSE";
bfd yes;
};
interface "dummy0" {
stub;
};
interface "eth2" {
stub;
};
interface "eth3" {
type pointopoint;
bfd yes;
};
};
}
The dummy0 interface has bound a /32 IPv4 and a /128 IPv6 address for
BGP lookback. OSPFv3 should provide us with IGP in order to facilitate iBGP.
Between BIRD nodes this works flawless.
When adding the Mikrotik router to the mix, the /128 addresses don't get
propagated. Other routes do and OSPFv3 seems to work fine, but the stub
routes seem to be ignored.
What am I missing here?
Thanks!
Cheers,
Kees
--
https://nefos.nl/contact <https://nefos.nl/contact>
Nefos IT bv
Ambachtsweg 25 (industrienummer 4217)
5627 BZ Eindhoven
Nederland
KvK 66494931
/Bereikbaar op maandag, dinsdag, donderdag en vrijdag tussen 09:00u en
17:00u./
