Hello! You're right, the information you found and described here is correct. Kudos to you for being able to dig it all out yourself.
We're all travelling this weekend with a limited time and internet access so we couldn't reply instantly as we sometimes do. Yet the fact that it apparently didn't take you excessive time, I'd interpret it that our development documentation is quite good. Anyway, to pickup on this, is there anything we could do better to help you finding the needed information faster and in more convenient way? Thank you for sharing. Maria On 21 May 2023 12:23:25 CEST, Pim van Pelt via Bird-users <bird-users@network.cz> wrote: >Hoi, > >To close out my monologue -- I sent https://gerrit.fd.io/r/c/vpp/+/38854 to >make VPP's Linux Controlplane plugin aware of NLM_F_REPLACE messages. >Rolled that out at AS8283 this morning, and our duplicate FIB entry issue >is gone. Nothing to see here, moving along :) > >groet, >Pim > >On Sat, May 20, 2023 at 11:50 PM Pim van Pelt <p...@ipng.nl> wrote: > >> Hoi, >> >> I think I've found the answer to my question by taking a look at git >> history in netlink handling. >> >> This commit: >> >> commit 8235c4747dcc92de2ea991f78cdf9c6b8fa7f522 >> >> Author: Ondrej Zajicek (work) <santi...@crfreenet.org> >> >> Date: Mon Jul 15 16:23:18 2019 +0200 >> >> >> Netlink: Use route replace for IPv4 >> >> >> Started using NL_OP_REPLACE for IPv4, but it kept it disabled for IPv6, >> and then this commit: >> >> >> commit 722daa950046a7ad307fd7aca8e0506f30b3d000 >> >> Author: Ondrej Zajicek <santi...@crfreenet.org> >> >> Date: Mon Jul 25 00:11:40 2022 +0200 >> >> >> Netlink: Simplify handling of IPv6 ECMP routes >> >> >> started using for IPv6 as well, where this commit: >> >> >> commit ddb1bdf2819ce69248d5a51e71d803f13548b217 >> >> Author: Ondrej Zajicek <santi...@crfreenet.org> >> >> Date: Tue Jul 26 18:45:20 2022 +0200 >> >> >> Netlink: Restrict route replace for IPv6 >> >> >> added a nice guard in nl_allow_replace() -- this explains the replace >> semantics (which 'ip monitor route' does not show), and answers my >> question. For my application, I'll have to take a good look at consuming >> messages with flag NLM_F_CREATE|NLM_F_REPLACE set; and otherwise perhaps >> add the ability to Bird2/Bird3 to holdback and >> issue NL_OP_DELETE + NL_OP_ADD. >> >> For the curious, the application is Vector Packet Processing [ref >> <https://ipng.ch/s/articles/2021/09/02/vpp-5.html>] which consumes >> Netlink messages from the Linux kernel, and uses them to program a >> userspace dataplane, see [Linux Control Plane >> <https://s3-docs.fd.io/vpp/23.06/developer/plugins/lcp.html>] for >> details. Until now, this system consumes RTM_NEWROUTE and RTM_DELROUTE but >> is not yet capable of consuming this replacing logic. I'll take a look at >> adding that. >> >> groet, >> Pim >> >> >> >> On Sat, May 20, 2023 at 11:10 PM Pim van Pelt <p...@ipng.nl> wrote: >> >>> Hoi, >>> >>> As a quick followup why I'm asking about versions -- on a Bird2.0.7, I do >>> see the delete-before-insert: >>> >>> root@chgtg0:~# ip -6 monitor route | grep 2001:678:d78::6 >>> >>> >>> # Raise OSPFv3 cost to prefer tf-0-0 >>> >>> *Deleted* 2001:678:d78::6 via fe80::21b:21ff:febd:c718 dev xe0-3.3102.20 >>> proto bird metric 32 pref medium >>> >>> 2001:678:d78::6 via fe80::6eb3:11ff:fe20:e0c4 dev tf0-0 proto bird metric >>> 32 pref medium >>> >>> >>> # Lower OSPFv3 cost to prefer xe0-3.3102.20 again >>> >>> *Deleted* 2001:678:d78::6 via fe80::6eb3:11ff:fe20:e0c4 dev tf0-0 proto >>> bird metric 32 pref medium >>> >>> 2001:678:d78::6 via fe80::21b:21ff:febd:c718 dev xe0-3.3102.20 proto bird >>> metric 32 pref medium >>> >>> groet, >>> Pim >>> >>> On Sat, May 20, 2023 at 10:51 PM Pim van Pelt <p...@ipng.nl> wrote: >>> >>>> Hoi folks, >>>> >>>> At Coloclue AS8283, we upgraded from Bird1.6.8 to Bird2.0.12 this week. >>>> We use two separate processes, one for IPv4 and one for IPv6 - and 2.0.7 in >>>> Debian is missing the ability to select 'accept ipv4' and 'accept ipv6' in >>>> BFD, so we installed backports and version 2.0.12). >>>> >>>> I am wondering if Bird2 later than 2.0.7 perhaps has an optimization >>>> when swapping routes? I would expect a swap to be "delete + add" but I am >>>> seeing only "add with new nexthop" appear in Netlink. >>>> >>>> Considering the following topology with link names and OSPFv3 costs >>>> associated: >>>> >>>> dcg-1 bond0.130 ---- bond0.130 eun-2 >>>> >>>> | 2000 | >>>> >>>> enp1s0f3 enp1s0f2 >>>> >>>> | | >>>> >>>> | 10 10 | >>>> >>>> | | >>>> >>>> enp1s0f3 enp1s0f3 >>>> >>>> | 1000 | >>>> >>>> dcg-2 eno2.3469 ---- eno2.3469 eun-3 >>>> >>>> If I restart the OSPFv3 protocol, I see that the topology settles in the >>>> expected way. What I observed with bird 2.0.12 is that there is a deletion >>>> of the currently selected route followed by one addition, when the shortest >>>> path reveales (dcg1 - dcg2 - eun3 - eun2, ospf_metric1 is 1020, this is >>>> fine): >>>> >>>> root@dcg-1:~# birdc -s /run/bird/bird6.ctl restart ospf1 >>>> >>>> root@dcg-1:~# ip -6 monitor route | grep 2a02:898:0:300::3 >>>> >>>> Deleted 2a02:898:0:300::3 via fe80::669d:99ff:feb1:31af dev bond0.130 >>>> proto bird metric 32 pref medium >>>> >>>> 2a02:898:0:300::3 via fe80::669d:99ff:feb1:3910 dev enp1s0f3 proto bird >>>> metric 32 pref medium >>>> >>>> Now I lower the cost of the dcg-1 -- eun-2 link from 2000 to 100, so >>>> that it becomes preferred (cost ospf_metric is 120): >>>> >>>> root@dcg-1:~# birdc -s /run/bird/bird6.ctl reconfigure ospf1 >>>> >>>> root@dcg-1:~# ip -6 monitor route | grep 2a02:898:0:300::3 >>>> >>>> *[[ HERE ]]* >>>> >>>> 2a02:898:0:300::3 via fe80::669d:99ff:feb1:31af dev bond0.130 proto bird >>>> metric 32 pref medium >>>> >>>> I would expect this new addition of the installed route on bond0.130 to >>>> be *preceded by a deletion* of the previous route from enp1s0f3, but >>>> this is not the case (marked in red with [[ HERE ]]). >>>> >>>> To anyone's knowledge: *Has this behavior changed between 2.0.7 and >>>> 2.0.12 ?* >>>> >>>> groet, >>>> Pim >>>> -- >>>> Pim van Pelt <p...@ipng.nl> >>>> PBVP1-RIPE - http://www.ipng.nl/ >>>> >>> >>> >>> -- >>> Pim van Pelt <p...@ipng.nl> >>> PBVP1-RIPE - http://www.ipng.nl/ >>> >> >> >> -- >> Pim van Pelt <p...@ipng.nl> >> PBVP1-RIPE - http://www.ipng.nl/ >> > > >-- >Pim van Pelt <p...@ipng.nl> >PBVP1-RIPE - http://www.ipng.nl/
