Hi,
thank you very much for your help, after adding a direct protocol RIP
runs fine.
MM
On 06/10/2023 16:23, Ondrej Zajicek wrote:
On Fri, Oct 06, 2023 at 04:05:28PM +0200, Miklós Máté wrote:
Hi,
I'm trying to set up BIRD to demonstrate RIP in a Mininet environment, but
it doesn't seem to work. I'm using the attached configs. The OSPF one works
properly, but with RIP it only sends a Request message on startup, and then
nothing. According to the log the Request is received properly, but no
Response is sent, and the periodic timer doesn't do anything either.
Hi
With RIP and other vector distance protocols, you need to provide local
direct routes using Direct protocol (they are not learned from Kernel
protocol).
See this:
https://gitlab.nic.cz/labs/bird-tools/-/blob/master/netlab/cf-rip-base/README.md
https://gitlab.nic.cz/labs/bird-tools/-/blob/master/netlab/cf-rip-base/bird_m1.conf
--
#!/usr/bin/perl
m:[A-Z]:?@;:@?=(@;=>$_)for(split$,,[A-Z]);push@@,lc(pack(
q=c*==>ord($;[$[+1])-chr(ord@;)));$_?${@}[++$#{@}]:$,=chr
(ord($@[$^W])-($#{y-++--;qq,;,}>>$_))for(0,1);print@@=>$/
