Hi tg,
Bird is probably not what you need here as it looks like you just want
to get two machines to talk to each other.
You should look at OpenVPN or WireGuard as a means to create encrypted
tunnels between them.
- Barry
t g <mailto:[email protected]>
2 November 2024 at 17:58
Thank you for your suggestion Yakov,
I added the sections you had mentionned as below and the neighbor is
still unreachable.
I am not a network expert but i am wondering if such a set up is
technically possible.
Do you know?
$ cat /etc/bird.conf
router id <public ip>;
protocol bgp bgp_static {
local as 65001;
neighbor <server 2 public ip> as 65001;
multihop 99;
ipv4 {
import all;
export filter {
if net = 10.1.1.1/32 then accept;
reject;
};
};
debug all;
}
protocol kernel {
ipv4 {
import all;
export all;
};
learn;
persist;
scan time 20;
}
protocol direct {
interface "*";
}
protocol device {
scan time 10;
}
Many Thanks,
tg
------------------------------------------------------------------------
*De :* Yakov Sh. <[email protected]>
*Envoyé :* samedi 2 novembre 2024 12:36
*À :* Talal Gharsa <[email protected]>
*Cc :* [email protected] <[email protected]>
*Objet :* Re: [BGP] Set up bgp through the internet on public servers
Hi,
Since you have only BGP protocol defined, BIRD knows nothing about any
routes that could exist on your system. If you want to import local
routes into BIRD you need to add some other protocols, usually it's
'device', 'direct' and 'kernel'.
Yakov Sh.
telegram: @darkyman
Sent with Proton Mail <https://proton.me/mail/home> secure email.
On Saturday, November 2nd, 2024 at 11:34, Talal Gharsa
<[email protected]> wrote:
--
Kind regards,
Barry O'Donovan
INEX Operations
https://www.inex.ie/support/
+353 1 531 3339
