ChangeSet 1.2182, 2005/03/14 10:02:44-08:00, [EMAIL PROTECTED]
Merge 2.6.11.3 into mainline
Makefile | 51 ++++++---
arch/ppc/platforms/4xx/ebony.h | 10 -
drivers/char/drm/drm_ioctl.c | 12 +-
drivers/media/video/adv7170.c | 5
drivers/media/video/adv7175.c | 5
drivers/media/video/bt819.c | 11 --
drivers/media/video/saa7110.c | 15 +-
drivers/media/video/saa7114.c | 5
drivers/media/video/saa7185.c | 5
drivers/net/r8169.c | 4
drivers/net/sis900.c | 220 +++++++++++++++++++++++++----------------
drivers/net/via-rhine.c | 8 -
12 files changed, 206 insertions(+), 145 deletions(-)
diff -Nru a/Makefile b/Makefile
--- a/Makefile 2005-03-14 23:10:04 -08:00
+++ b/Makefile 2005-03-14 23:10:04 -08:00
@@ -18,7 +18,7 @@
#
# Most importantly: sub-Makefiles should only ever modify files in
# their own directory. If in some directory we have a dependency on
-# a file in another dir (which doesn't happen often, but it's of
+# a file in another dir (which doesn't happen often, but it's often
# unavoidable when linking the built-in.o targets which finally
# turn into vmlinux), we will call a sub make in that other dir, and
# after that we are sure that everything which is in that other dir
@@ -67,7 +67,7 @@
# kbuild supports saving output files in a separate directory.
-# To locate output files in a separate directory two syntax'es are supported.
+# To locate output files in a separate directory two syntaxes are supported.
# In both cases the working directory must be the root of the kernel src.
# 1) O=
# Use "make O=dir/to/store/output/files/"
@@ -78,7 +78,8 @@
# export KBUILD_OUTPUT=dir/to/store/output/files/
# make
#
-# The O= assigment takes precedence over the KBUILD_OUTPUT environment
variable.
+# The O= assignment takes precedence over the KBUILD_OUTPUT environment
+# variable.
# KBUILD_SRC is set on invocation of make in OBJ directory
@@ -539,16 +540,14 @@
# Default kernel image to build when no specific target is given.
# KBUILD_IMAGE may be overruled on the commandline or
# set in the environment
-# Also any assingments in arch/$(ARCH)/Makefiel take precedence over
+# Also any assignments in arch/$(ARCH)/Makefile take precedence over
# this default value
export KBUILD_IMAGE ?= vmlinux
#
# INSTALL_PATH specifies where to place the updated kernel and system map
-# images. Uncomment if you want to place them anywhere other than root.
-#
-
-#export INSTALL_PATH=/boot
+# images. Default is /boot, but you can set it to other values
+export INSTALL_PATH ?= /boot
#
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
@@ -898,7 +897,7 @@
endif
.PHONY: _modinst_post
_modinst_post: _modinst_
- if [ -r System.map ]; then $(DEPMOD) -ae -F System.map $(depmod_opts)
$(KERNELRELEASE); fi
+ if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map
$(depmod_opts) $(KERNELRELEASE); fi
else # CONFIG_MODULES
@@ -1096,9 +1095,17 @@
crmodverdir:
$(Q)mkdir -p $(MODVERDIR)
+.PHONY: $(objtree)/Module.symvers
+$(objtree)/Module.symvers:
+ @test -e $(objtree)/Module.symvers || ( \
+ echo; \
+ echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \
+ echo " is missing; modules will have no dependencies and
modversions."; \
+ echo )
+
module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
.PHONY: $(module-dirs) modules
-$(module-dirs): crmodverdir
+$(module-dirs): crmodverdir $(objtree)/Module.symvers
$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
modules: $(module-dirs)
@@ -1136,20 +1143,30 @@
# Generate tags for editors
# ---------------------------------------------------------------------------
+#We want __srctree to totally vanish out when KBUILD_OUTPUT is not set
+#(which is the most common case IMHO) to avoid unneeded clutter in the big
tags file.
+#Adding $(srctree) adds about 20M on i386 to the size of the output file!
+
+ifeq ($(KBUILD_OUTPUT),)
+__srctree =
+else
+__srctree = $(srctree)/
+endif
+
define all-sources
- ( find $(srctree) $(RCS_FIND_IGNORE) \
+ ( find $(__srctree) $(RCS_FIND_IGNORE) \
\( -name include -o -name arch \) -prune -o \
-name '*.[chS]' -print; \
- find $(srctree)/arch/$(ARCH) $(RCS_FIND_IGNORE) \
+ find $(__srctree)arch/$(ARCH) $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
- find $(srctree)/security/selinux/include $(RCS_FIND_IGNORE) \
+ find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
- find $(srctree)/include $(RCS_FIND_IGNORE) \
+ find $(__srctree)include $(RCS_FIND_IGNORE) \
\( -name config -o -name 'asm-*' \) -prune \
-o -name '*.[chS]' -print; \
- find $(srctree)/include/asm-$(ARCH) $(RCS_FIND_IGNORE) \
+ find $(__srctree)include/asm-$(ARCH) $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
- find $(srctree)/include/asm-generic $(RCS_FIND_IGNORE) \
+ find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print )
endef
@@ -1172,7 +1189,7 @@
define cmd_tags
rm -f $@; \
CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I
__initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL"`; \
- $(all-sources) | xargs ctags $$CTAGSF -a
+ $(all-sources) | xargs ctags $$CTAGSF -a --extra=+f
endef
TAGS: FORCE
diff -Nru a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h
--- a/arch/ppc/platforms/4xx/ebony.h 2005-03-14 23:10:04 -08:00
+++ b/arch/ppc/platforms/4xx/ebony.h 2005-03-14 23:10:04 -08:00
@@ -23,13 +23,9 @@
/* F/W TLB mapping used in bootloader glue to reset EMAC */
#define PPC44x_EMAC0_MR0 0xE0000800
-/* Macros to get at Ebony VPD info */
-#define EBONY_VPD_BASE 0x00000001fffffe00ULL
-#define EBONY_VPD_SIZE 0x24
-#define EBONY_NA0_OFFSET 0x0c
-#define EBONY_NA1_OFFSET 0x18
-#define EBONY_NA0_ADDR(base) (base + EBONY_NA0_OFFSET)
-#define EBONY_NA1_ADDR(base) (base + EBONY_NA1_OFFSET)
+/* Where to find the MAC info */
+#define EBONY_OPENBIOS_MAC_BASE 0xfffffe0c
+#define EBONY_OPENBIOS_MAC_OFFSET 0x0c
/* Default clock rates for Rev. B and Rev. C silicon */
#define EBONY_440GP_RB_SYSCLK 33000000
diff -Nru a/drivers/char/drm/drm_ioctl.c b/drivers/char/drm/drm_ioctl.c
--- a/drivers/char/drm/drm_ioctl.c 2005-03-14 23:10:04 -08:00
+++ b/drivers/char/drm/drm_ioctl.c 2005-03-14 23:10:04 -08:00
@@ -53,7 +53,7 @@
unsigned int cmd, unsigned long arg)
{
drm_file_t *priv = filp->private_data;
- drm_device_t *dev = priv->dev;
+ drm_device_t *dev = priv->head->dev;
drm_unique_t __user *argp = (void __user *)arg;
drm_unique_t u;
@@ -87,7 +87,7 @@
unsigned int cmd, unsigned long arg)
{
drm_file_t *priv = filp->private_data;
- drm_device_t *dev = priv->dev;
+ drm_device_t *dev = priv->head->dev;
drm_unique_t u;
int domain, bus, slot, func, ret;
@@ -173,7 +173,7 @@
unsigned int cmd, unsigned long arg )
{
drm_file_t *priv = filp->private_data;
- drm_device_t *dev = priv->dev;
+ drm_device_t *dev = priv->head->dev;
drm_map_t __user *argp = (void __user *)arg;
drm_map_t map;
drm_map_list_t *r_list = NULL;
@@ -233,7 +233,7 @@
unsigned int cmd, unsigned long arg )
{
drm_file_t *priv = filp->private_data;
- drm_device_t *dev = priv->dev;
+ drm_device_t *dev = priv->head->dev;
drm_client_t __user *argp = (void __user *)arg;
drm_client_t client;
drm_file_t *pt;
@@ -277,7 +277,7 @@
unsigned int cmd, unsigned long arg )
{
drm_file_t *priv = filp->private_data;
- drm_device_t *dev = priv->dev;
+ drm_device_t *dev = priv->head->dev;
drm_stats_t stats;
int i;
@@ -325,6 +325,8 @@
drm_version_t version;
DRM_COPY_FROM_USER_IOCTL(sv, argp, sizeof(sv));
+
+ memset(&version, 0, sizeof(version));
memset(&version, 0, sizeof(version));
diff -Nru a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c
--- a/drivers/media/video/adv7170.c 2005-03-14 23:10:04 -08:00
+++ b/drivers/media/video/adv7170.c 2005-03-14 23:10:04 -08:00
@@ -402,7 +402,6 @@
.force = force
};
-static int adv7170_i2c_id = 0;
static struct i2c_driver i2c_driver_adv7170;
static int
@@ -432,7 +431,6 @@
client->adapter = adapter;
client->driver = &i2c_driver_adv7170;
client->flags = I2C_CLIENT_ALLOW_USE;
- client->id = adv7170_i2c_id++;
if ((client->addr == I2C_ADV7170 >> 1) ||
(client->addr == (I2C_ADV7170 >> 1) + 1)) {
dname = adv7170_name;
@@ -444,8 +442,7 @@
kfree(client);
return 0;
}
- snprintf(I2C_NAME(client), sizeof(I2C_NAME(client)) - 1,
- "%s[%d]", dname, client->id);
+ strlcpy(I2C_NAME(client), dname, sizeof(I2C_NAME(client)));
encoder = kmalloc(sizeof(struct adv7170), GFP_KERNEL);
if (encoder == NULL) {
diff -Nru a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c
--- a/drivers/media/video/adv7175.c 2005-03-14 23:10:04 -08:00
+++ b/drivers/media/video/adv7175.c 2005-03-14 23:10:04 -08:00
@@ -452,7 +452,6 @@
.force = force
};
-static int adv7175_i2c_id = 0;
static struct i2c_driver i2c_driver_adv7175;
static int
@@ -482,7 +481,6 @@
client->adapter = adapter;
client->driver = &i2c_driver_adv7175;
client->flags = I2C_CLIENT_ALLOW_USE;
- client->id = adv7175_i2c_id++;
if ((client->addr == I2C_ADV7175 >> 1) ||
(client->addr == (I2C_ADV7175 >> 1) + 1)) {
dname = adv7175_name;
@@ -494,8 +492,7 @@
kfree(client);
return 0;
}
- snprintf(I2C_NAME(client), sizeof(I2C_NAME(client)) - 1,
- "%s[%d]", dname, client->id);
+ strlcpy(I2C_NAME(client), dname, sizeof(I2C_NAME(client)));
encoder = kmalloc(sizeof(struct adv7175), GFP_KERNEL);
if (encoder == NULL) {
diff -Nru a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c
--- a/drivers/media/video/bt819.c 2005-03-14 23:10:04 -08:00
+++ b/drivers/media/video/bt819.c 2005-03-14 23:10:04 -08:00
@@ -517,7 +517,6 @@
.force = force
};
-static int bt819_i2c_id = 0;
static struct i2c_driver i2c_driver_bt819;
static int
@@ -546,7 +545,6 @@
client->adapter = adapter;
client->driver = &i2c_driver_bt819;
client->flags = I2C_CLIENT_ALLOW_USE;
- client->id = bt819_i2c_id++;
decoder = kmalloc(sizeof(struct bt819), GFP_KERNEL);
if (decoder == NULL) {
@@ -568,16 +566,13 @@
id = bt819_read(client, 0x17);
switch (id & 0xf0) {
case 0x70:
- snprintf(I2C_NAME(client), sizeof(I2C_NAME(client)) - 1,
- "bt819a[%d]", client->id);
+ strlcpy(I2C_NAME(client), "bt819a", sizeof(I2C_NAME(client)));
break;
case 0x60:
- snprintf(I2C_NAME(client), sizeof(I2C_NAME(client)) - 1,
- "bt817a[%d]", client->id);
+ strlcpy(I2C_NAME(client), "bt817a", sizeof(I2C_NAME(client)));
break;
case 0x20:
- snprintf(I2C_NAME(client), sizeof(I2C_NAME(client)) - 1,
- "bt815a[%d]", client->id);
+ strlcpy(I2C_NAME(client), "bt815a", sizeof(I2C_NAME(client)));
break;
default:
dprintk(1,
diff -Nru a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c
--- a/drivers/media/video/saa7110.c 2005-03-14 23:10:04 -08:00
+++ b/drivers/media/video/saa7110.c 2005-03-14 23:10:04 -08:00
@@ -30,6 +30,7 @@
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/wait.h>
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -204,13 +205,16 @@
static int
determine_norm (struct i2c_client *client)
{
+ DEFINE_WAIT(wait);
struct saa7110 *decoder = i2c_get_clientdata(client);
int status;
/* mode changed, start automatic detection */
saa7110_write_block(client, initseq, sizeof(initseq));
saa7110_selmux(client, decoder->input);
- sleep_on_timeout(&decoder->wq, HZ / 4);
+ prepare_to_wait(&decoder->wq, &wait, TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ/4);
+ finish_wait(&decoder->wq, &wait);
status = saa7110_read(client);
if (status & 0x40) {
dprintk(1, KERN_INFO "%s: status=0x%02x (no signal)\n",
@@ -249,7 +253,9 @@
saa7110_write(client, 0x11, 0x59);
//saa7110_write(client,0x2E,0x9A);
- sleep_on_timeout(&decoder->wq, HZ / 4);
+ prepare_to_wait(&decoder->wq, &wait, TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ/4);
+ finish_wait(&decoder->wq, &wait);
status = saa7110_read(client);
if ((status & 0x03) == 0x01) {
@@ -475,7 +481,6 @@
.force = force
};
-static int saa7110_i2c_id = 0;
static struct i2c_driver i2c_driver_saa7110;
static int
@@ -506,9 +511,7 @@
client->adapter = adapter;
client->driver = &i2c_driver_saa7110;
client->flags = I2C_CLIENT_ALLOW_USE;
- client->id = saa7110_i2c_id++;
- snprintf(I2C_NAME(client), sizeof(I2C_NAME(client)) - 1,
- "saa7110[%d]", client->id);
+ strlcpy(I2C_NAME(client), "saa7110", sizeof(I2C_NAME(client)));
decoder = kmalloc(sizeof(struct saa7110), GFP_KERNEL);
if (decoder == 0) {
diff -Nru a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c
--- a/drivers/media/video/saa7114.c 2005-03-14 23:10:04 -08:00
+++ b/drivers/media/video/saa7114.c 2005-03-14 23:10:04 -08:00
@@ -838,7 +838,6 @@
.force = force
};
-static int saa7114_i2c_id = 0;
static struct i2c_driver i2c_driver_saa7114;
static int
@@ -871,9 +870,7 @@
client->adapter = adapter;
client->driver = &i2c_driver_saa7114;
client->flags = I2C_CLIENT_ALLOW_USE;
- client->id = saa7114_i2c_id++;
- snprintf(I2C_NAME(client), sizeof(I2C_NAME(client)) - 1,
- "saa7114[%d]", client->id);
+ strlcpy(I2C_NAME(client), "saa7114", sizeof(I2C_NAME(client)));
decoder = kmalloc(sizeof(struct saa7114), GFP_KERNEL);
if (decoder == NULL) {
diff -Nru a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c
--- a/drivers/media/video/saa7185.c 2005-03-14 23:10:04 -08:00
+++ b/drivers/media/video/saa7185.c 2005-03-14 23:10:04 -08:00
@@ -398,7 +398,6 @@
.force = force
};
-static int saa7185_i2c_id = 0;
static struct i2c_driver i2c_driver_saa7185;
static int
@@ -427,9 +426,7 @@
client->adapter = adapter;
client->driver = &i2c_driver_saa7185;
client->flags = I2C_CLIENT_ALLOW_USE;
- client->id = saa7185_i2c_id++;
- snprintf(I2C_NAME(client), sizeof(I2C_NAME(client)) - 1,
- "saa7185[%d]", client->id);
+ strlcpy(I2C_NAME(client), "saa7185", sizeof(I2C_NAME(client)));
encoder = kmalloc(sizeof(struct saa7185), GFP_KERNEL);
if (encoder == NULL) {
diff -Nru a/drivers/net/r8169.c b/drivers/net/r8169.c
--- a/drivers/net/r8169.c 2005-03-14 23:10:04 -08:00
+++ b/drivers/net/r8169.c 2005-03-14 23:10:04 -08:00
@@ -1180,7 +1180,7 @@
/* enable device (incl. PCI PM wakeup and hotplug setup) */
rc = pci_enable_device(pdev);
if (rc) {
- printk(KERN_ERR PFX "%s: enable failure\n", pdev->slot_name);
+ printk(KERN_ERR PFX "%s: enable failure\n", pci_name(pdev));
goto err_out_free_dev;
}
@@ -1218,7 +1218,7 @@
rc = pci_request_regions(pdev, MODULENAME);
if (rc) {
printk(KERN_ERR PFX "%s: could not request regions.\n",
- pdev->slot_name);
+ pci_name(pdev));
goto err_out_mwi;
}
diff -Nru a/drivers/net/sis900.c b/drivers/net/sis900.c
--- a/drivers/net/sis900.c 2005-03-14 23:10:04 -08:00
+++ b/drivers/net/sis900.c 2005-03-14 23:10:04 -08:00
@@ -1,6 +1,6 @@
/* sis900.c: A SiS 900/7016 PCI Fast Ethernet driver for Linux.
Copyright 1999 Silicon Integrated System Corporation
- Revision: 1.08.06 Sep. 24 2002
+ Revision: 1.08.08 Jan. 22 2005
Modified from the driver which is originally written by Donald Becker.
@@ -16,8 +16,8 @@
preliminary Rev. 1.0 Nov. 10, 1998
SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution,
preliminary Rev. 1.0 Jan. 18, 1998
- http://www.sis.com.tw/support/databook.htm
+ Rev 1.08.08 Jan. 22 2005 Daniele Venzano use netif_msg for debugging
messages
Rev 1.08.07 Nov. 2 2003 Daniele Venzano <[EMAIL PROTECTED]> add
suspend/resume support
Rev 1.08.06 Sep. 24 2002 Mufasa Yang bug fix for Tx timeout & add SiS963
support
Rev 1.08.05 Jun. 6 2002 Mufasa Yang bug fix for read_eeprom & Tx
descriptor over-boundary
@@ -69,12 +69,13 @@
#include <asm/processor.h> /* Processor type for cache alignment. */
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/uaccess.h> /* User space memory access functions */
#include "sis900.h"
#define SIS900_MODULE_NAME "sis900"
-#define SIS900_DRV_VERSION "v1.08.07 11/02/2003"
+#define SIS900_DRV_VERSION "v1.08.08 Jan. 22 2005"
static char version[] __devinitdata =
KERN_INFO "sis900.c: " SIS900_DRV_VERSION "\n";
@@ -82,8 +83,13 @@
static int max_interrupt_work = 40;
static int multicast_filter_limit = 128;
-#define sis900_debug debug
-static int sis900_debug;
+static int sis900_debug = -1; /* Use SIS900_DEF_MSG as value */
+
+#define SIS900_DEF_MSG \
+ (NETIF_MSG_DRV | \
+ NETIF_MSG_LINK | \
+ NETIF_MSG_RX_ERR | \
+ NETIF_MSG_TX_ERR)
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (4*HZ)
@@ -160,6 +166,8 @@
struct timer_list timer; /* Link status detection timer. */
u8 autong_complete; /* 1: auto-negotiate complete */
+ u32 msg_enable;
+
unsigned int cur_rx, dirty_rx; /* producer/comsumer pointers for Tx/Rx
ring */
unsigned int cur_tx, dirty_tx;
@@ -174,6 +182,7 @@
unsigned int tx_full; /* The Tx queue is full. */
u8 host_bridge_rev;
+ u8 chipset_rev;
};
MODULE_AUTHOR("Jim Huang <[EMAIL PROTECTED]>, Ollie Lho <[EMAIL PROTECTED]>");
@@ -182,11 +191,12 @@
module_param(multicast_filter_limit, int, 0444);
module_param(max_interrupt_work, int, 0444);
-module_param(debug, int, 0444);
+module_param(sis900_debug, int, 0444);
MODULE_PARM_DESC(multicast_filter_limit, "SiS 900/7016 maximum number of
filtered multicast addresses");
MODULE_PARM_DESC(max_interrupt_work, "SiS 900/7016 maximum events handled per
interrupt");
-MODULE_PARM_DESC(debug, "SiS 900/7016 debug level (2-4)");
+MODULE_PARM_DESC(sis900_debug, "SiS 900/7016 bitmapped debugging message
level");
+static void sis900_poll(struct net_device *dev);
static int sis900_open(struct net_device *net_dev);
static int sis900_mii_probe (struct net_device * net_dev);
static void sis900_init_rxfilter (struct net_device * net_dev);
@@ -235,7 +245,7 @@
/* check to see if we have sane EEPROM */
signature = (u16) read_eeprom(ioaddr, EEPROMSignature);
if (signature == 0xffff || signature == 0x0000) {
- printk (KERN_INFO "%s: Error EERPOM read %x\n",
+ printk (KERN_WARNING "%s: Error EERPOM read %x\n",
pci_name(pci_dev), signature);
return 0;
}
@@ -268,7 +278,8 @@
if (!isa_bridge)
isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0018,
isa_bridge);
if (!isa_bridge) {
- printk("%s: Can not find ISA bridge\n", pci_name(pci_dev));
+ printk(KERN_WARNING "%s: Can not find ISA bridge\n",
+ pci_name(pci_dev));
return 0;
}
pci_read_config_byte(isa_bridge, 0x48, ®);
@@ -386,8 +397,8 @@
void *ring_space;
long ioaddr;
int i, ret;
- u8 revision;
char *card_name = card_names[pci_id->driver_data];
+ const char *dev_name = pci_name(pci_dev);
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
@@ -456,31 +467,47 @@
net_dev->tx_timeout = sis900_tx_timeout;
net_dev->watchdog_timeo = TX_TIMEOUT;
net_dev->ethtool_ops = &sis900_ethtool_ops;
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ net_dev->poll_controller = &sis900_poll;
+#endif
+
+ if (sis900_debug > 0)
+ sis_priv->msg_enable = sis900_debug;
+ else
+ sis_priv->msg_enable = SIS900_DEF_MSG;
/* Get Mac address according to the chip revision */
- pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &revision);
+ pci_read_config_byte(pci_dev, PCI_CLASS_REVISION,
&(sis_priv->chipset_rev));
+ if(netif_msg_probe(sis_priv))
+ printk(KERN_DEBUG "%s: detected revision %2.2x, "
+ "trying to get MAC address...\n",
+ dev_name, sis_priv->chipset_rev);
+
ret = 0;
-
- if (revision == SIS630E_900_REV)
+ if (sis_priv->chipset_rev == SIS630E_900_REV)
ret = sis630e_get_mac_addr(pci_dev, net_dev);
- else if ((revision > 0x81) && (revision <= 0x90) )
+ else if ((sis_priv->chipset_rev > 0x81) && (sis_priv->chipset_rev <=
0x90) )
ret = sis635_get_mac_addr(pci_dev, net_dev);
- else if (revision == SIS96x_900_REV)
+ else if (sis_priv->chipset_rev == SIS96x_900_REV)
ret = sis96x_get_mac_addr(pci_dev, net_dev);
else
ret = sis900_get_mac_addr(pci_dev, net_dev);
if (ret == 0) {
+ printk(KERN_WARNING "%s: Cannot read MAC address.\n", dev_name);
ret = -ENODEV;
goto err_unmap_rx;
}
/* 630ET : set the mii access mode as software-mode */
- if (revision == SIS630ET_900_REV)
+ if (sis_priv->chipset_rev == SIS630ET_900_REV)
outl(ACCESSMODE | inl(ioaddr + cr), ioaddr + cr);
/* probe for mii transceiver */
if (sis900_mii_probe(net_dev) == 0) {
+ printk(KERN_WARNING "%s: Error probing MII device.\n",
+ dev_name);
ret = -ENODEV;
goto err_unmap_rx;
}
@@ -535,7 +562,6 @@
u16 poll_bit = MII_STAT_LINK, status = 0;
unsigned long timeout = jiffies + 5 * HZ;
int phy_addr;
- u8 revision;
sis_priv->mii = NULL;
@@ -549,12 +575,16 @@
for(i = 0; i < 2; i++)
mii_status = mdio_read(net_dev, phy_addr, MII_STATUS);
- if (mii_status == 0xffff || mii_status == 0x0000)
- /* the mii is not accessible, try next one */
+ if (mii_status == 0xffff || mii_status == 0x0000) {
+ if (netif_msg_probe(sis_priv))
+ printk(KERN_DEBUG "%s: MII at address %d"
+ " not accessible\n",
+ dev_name, phy_addr);
continue;
+ }
if ((mii_phy = kmalloc(sizeof(struct mii_phy), GFP_KERNEL)) ==
NULL) {
- printk(KERN_INFO "Cannot allocate mem for struct
mii_phy\n");
+ printk(KERN_WARNING "Cannot allocate mem for struct
mii_phy\n");
mii_phy = sis_priv->first_mii;
while (mii_phy) {
struct mii_phy *phy;
@@ -580,9 +610,11 @@
if (mii_chip_table[i].phy_types == MIX)
mii_phy->phy_types =
(mii_status & (MII_STAT_CAN_TX_FDX
| MII_STAT_CAN_TX)) ? LAN : HOME;
- printk(KERN_INFO "%s: %s transceiver found at
address %d.\n",
- dev_name, mii_chip_table[i].name,
- phy_addr);
+ printk(KERN_INFO "%s: %s transceiver found "
+ "at address %d.\n",
+ dev_name,
+ mii_chip_table[i].name,
+ phy_addr);
break;
}
@@ -625,8 +657,7 @@
}
}
- pci_read_config_byte(sis_priv->pci_dev, PCI_CLASS_REVISION, &revision);
- if (revision == SIS630E_900_REV) {
+ if (sis_priv->chipset_rev == SIS630E_900_REV) {
/* SiS 630E has some bugs on default value of PHY registers */
mdio_write(net_dev, sis_priv->cur_phy, MII_ANADV, 0x05e1);
mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG1, 0x22);
@@ -928,6 +959,20 @@
return status;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+*/
+static void sis900_poll(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ sis900_interrupt(dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
+
/**
* sis900_open - open sis900 device
* @net_dev: the net device to open
@@ -941,15 +986,13 @@
{
struct sis900_private *sis_priv = net_dev->priv;
long ioaddr = net_dev->base_addr;
- u8 revision;
int ret;
/* Soft reset the chip. */
sis900_reset(net_dev);
/* Equalizer workaround Rule */
- pci_read_config_byte(sis_priv->pci_dev, PCI_CLASS_REVISION, &revision);
- sis630_set_eq(net_dev, revision);
+ sis630_set_eq(net_dev, sis_priv->chipset_rev);
ret = request_irq(net_dev->irq, &sis900_interrupt, SA_SHIRQ,
net_dev->name, net_dev);
@@ -997,6 +1040,7 @@
static void
sis900_init_rxfilter (struct net_device * net_dev)
{
+ struct sis900_private *sis_priv = net_dev->priv;
long ioaddr = net_dev->base_addr;
u32 rfcrSave;
u32 i;
@@ -1014,8 +1058,8 @@
outl((i << RFADDR_shift), ioaddr + rfcr);
outl(w, ioaddr + rfdr);
- if (sis900_debug > 2) {
- printk(KERN_INFO "%s: Receive Filter Addrss[%d]=%x\n",
+ if (netif_msg_hw(sis_priv)) {
+ printk(KERN_DEBUG "%s: Receive Filter Addrss[%d]=%x\n",
net_dev->name, i, inl(ioaddr + rfdr));
}
}
@@ -1052,8 +1096,8 @@
/* load Transmit Descriptor Register */
outl(sis_priv->tx_ring_dma, ioaddr + txdp);
- if (sis900_debug > 2)
- printk(KERN_INFO "%s: TX descriptor register loaded with:
%8.8x\n",
+ if (netif_msg_hw(sis_priv))
+ printk(KERN_DEBUG "%s: TX descriptor register loaded with:
%8.8x\n",
net_dev->name, inl(ioaddr + txdp));
}
@@ -1106,8 +1150,8 @@
/* load Receive Descriptor Register */
outl(sis_priv->rx_ring_dma, ioaddr + rxdp);
- if (sis900_debug > 2)
- printk(KERN_INFO "%s: RX descriptor register loaded with:
%8.8x\n",
+ if (netif_msg_hw(sis_priv))
+ printk(KERN_DEBUG "%s: RX descriptor register loaded with:
%8.8x\n",
net_dev->name, inl(ioaddr + rxdp));
}
@@ -1217,7 +1261,6 @@
struct mii_phy *mii_phy = sis_priv->mii;
static int next_tick = 5*HZ;
u16 status;
- u8 revision;
if (!sis_priv->autong_complete){
int speed, duplex = 0;
@@ -1225,9 +1268,7 @@
sis900_read_mode(net_dev, &speed, &duplex);
if (duplex){
sis900_set_mode(net_dev->base_addr, speed, duplex);
- pci_read_config_byte(sis_priv->pci_dev,
- PCI_CLASS_REVISION, &revision);
- sis630_set_eq(net_dev, revision);
+ sis630_set_eq(net_dev, sis_priv->chipset_rev);
netif_start_queue(net_dev);
}
@@ -1254,16 +1295,15 @@
/* Link ON -> OFF */
if (!(status & MII_STAT_LINK)){
netif_carrier_off(net_dev);
- printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
+ if(netif_msg_link(sis_priv))
+ printk(KERN_INFO "%s: Media Link Off\n",
net_dev->name);
/* Change mode issue */
if ((mii_phy->phy_id0 == 0x001D) &&
((mii_phy->phy_id1 & 0xFFF0) == 0x8000))
sis900_reset_phy(net_dev,
sis_priv->cur_phy);
- pci_read_config_byte(sis_priv->pci_dev,
- PCI_CLASS_REVISION, &revision);
- sis630_set_eq(net_dev, revision);
+ sis630_set_eq(net_dev, sis_priv->chipset_rev);
goto LookForLink;
}
@@ -1369,7 +1409,8 @@
status = mdio_read(net_dev, phy_addr, MII_STATUS);
if (!(status & MII_STAT_LINK)){
- printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
+ if(netif_msg_link(sis_priv))
+ printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
sis_priv->autong_complete = 1;
netif_carrier_off(net_dev);
return;
@@ -1431,7 +1472,8 @@
*speed = HW_SPEED_100_MBPS;
}
- printk(KERN_INFO "%s: Media Link On %s %s-duplex \n",
+ if(netif_msg_link(sis_priv))
+ printk(KERN_INFO "%s: Media Link On %s %s-duplex \n",
net_dev->name,
*speed == HW_SPEED_100_MBPS ?
"100mbps" : "10mbps",
@@ -1454,8 +1496,9 @@
unsigned long flags;
int i;
- printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x \n",
- net_dev->name, inl(ioaddr + cr), inl(ioaddr + isr));
+ if(netif_msg_tx_err(sis_priv))
+ printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x \n",
+ net_dev->name, inl(ioaddr + cr), inl(ioaddr + isr));
/* Disable interrupts by clearing the interrupt mask. */
outl(0x0000, ioaddr + imr);
@@ -1556,8 +1599,8 @@
net_dev->trans_start = jiffies;
- if (sis900_debug > 3)
- printk(KERN_INFO "%s: Queued Tx packet at %p size %d "
+ if (netif_msg_tx_queued(sis_priv))
+ printk(KERN_DEBUG "%s: Queued Tx packet at %p size %d "
"to slot %d.\n",
net_dev->name, skb->data, (int)skb->len, entry);
@@ -1604,20 +1647,22 @@
/* something strange happened !!! */
if (status & HIBERR) {
- printk(KERN_INFO "%s: Abnormal interrupt,"
- "status %#8.8x.\n", net_dev->name, status);
+ if(netif_msg_intr(sis_priv))
+ printk(KERN_INFO "%s: Abnormal interrupt,"
+ "status %#8.8x.\n", net_dev->name,
status);
break;
}
if (--boguscnt < 0) {
- printk(KERN_INFO "%s: Too much work at interrupt, "
- "interrupt status = %#8.8x.\n",
- net_dev->name, status);
+ if(netif_msg_intr(sis_priv))
+ printk(KERN_INFO "%s: Too much work at
interrupt, "
+ "interrupt status = %#8.8x.\n",
+ net_dev->name, status);
break;
}
} while (1);
- if (sis900_debug > 3)
- printk(KERN_INFO "%s: exiting interrupt, "
+ if(netif_msg_intr(sis_priv))
+ printk(KERN_DEBUG "%s: exiting interrupt, "
"interrupt status = 0x%#8.8x.\n",
net_dev->name, inl(ioaddr + isr));
@@ -1642,8 +1687,8 @@
unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC;
u32 rx_status = sis_priv->rx_ring[entry].cmdsts;
- if (sis900_debug > 3)
- printk(KERN_INFO "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d "
+ if (netif_msg_rx_status(sis_priv))
+ printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d "
"status:0x%8.8x\n",
sis_priv->cur_rx, sis_priv->dirty_rx, rx_status);
@@ -1654,8 +1699,8 @@
if (rx_status &
(ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) {
/* corrupted packet received */
- if (sis900_debug > 3)
- printk(KERN_INFO "%s: Corrupted packet "
+ if (netif_msg_rx_err(sis_priv))
+ printk(KERN_DEBUG "%s: Corrupted packet "
"received, buffer status = 0x%8.8x.\n",
net_dev->name, rx_status);
sis_priv->stats.rx_errors++;
@@ -1676,9 +1721,10 @@
some unknow bugs, it is possible that
we are working on NULL sk_buff :-( */
if (sis_priv->rx_skbuff[entry] == NULL) {
- printk(KERN_INFO "%s: NULL pointer "
- "encountered in Rx ring, skipping\n",
- net_dev->name);
+ if (netif_msg_rx_err(sis_priv))
+ printk(KERN_INFO "%s: NULL pointer "
+ "encountered in Rx ring,
skipping\n",
+ net_dev->name);
break;
}
@@ -1705,9 +1751,10 @@
* "hole" on the buffer ring, it is not clear
* how the hardware will react to this kind
* of degenerated buffer */
- printk(KERN_INFO "%s: Memory squeeze,"
- "deferring packet.\n",
- net_dev->name);
+ if (netif_msg_rx_status(sis_priv))
+ printk(KERN_INFO "%s: Memory squeeze,"
+ "deferring packet.\n",
+ net_dev->name);
sis_priv->rx_skbuff[entry] = NULL;
/* reset buffer descriptor state */
sis_priv->rx_ring[entry].cmdsts = 0;
@@ -1741,9 +1788,10 @@
* "hole" on the buffer ring, it is not clear
* how the hardware will react to this kind
* of degenerated buffer */
- printk(KERN_INFO "%s: Memory squeeze,"
- "deferring packet.\n",
- net_dev->name);
+ if (netif_msg_rx_err(sis_priv))
+ printk(KERN_INFO "%s: Memory squeeze,"
+ "deferring packet.\n",
+ net_dev->name);
sis_priv->stats.rx_dropped++;
break;
}
@@ -1792,8 +1840,8 @@
if (tx_status & (ABORT | UNDERRUN | OWCOLL)) {
/* packet unsuccessfully transmitted */
- if (sis900_debug > 3)
- printk(KERN_INFO "%s: Transmit "
+ if (netif_msg_tx_err(sis_priv))
+ printk(KERN_DEBUG "%s: Transmit "
"error, Tx status %8.8x.\n",
net_dev->name, tx_status);
sis_priv->stats.tx_errors++;
@@ -1904,8 +1952,22 @@
strcpy (info->bus_info, pci_name(sis_priv->pci_dev));
}
+static u32 sis900_get_msglevel(struct net_device *net_dev)
+{
+ struct sis900_private *sis_priv = net_dev->priv;
+ return sis_priv->msg_enable;
+}
+
+static void sis900_set_msglevel(struct net_device *net_dev, u32 value)
+{
+ struct sis900_private *sis_priv = net_dev->priv;
+ sis_priv->msg_enable = value;
+}
+
static struct ethtool_ops sis900_ethtool_ops = {
- .get_drvinfo = sis900_get_drvinfo,
+ .get_drvinfo = sis900_get_drvinfo,
+ .get_msglevel = sis900_get_msglevel,
+ .set_msglevel = sis900_set_msglevel,
};
/**
@@ -2046,12 +2108,10 @@
case IF_PORT_AUI: /* AUI */
case IF_PORT_100BASEFX: /* 100BaseFx */
/* These Modes are not supported (are they?)*/
- printk(KERN_INFO "Not supported");
return -EOPNOTSUPP;
break;
default:
- printk(KERN_INFO "Invalid");
return -EINVAL;
}
}
@@ -2097,11 +2157,10 @@
u16 mc_filter[16] = {0}; /* 256/128 bits multicast hash table */
int i, table_entries;
u32 rx_mode;
- u8 revision;
/* 635 Hash Table entires = 256(2^16) */
- pci_read_config_byte(sis_priv->pci_dev, PCI_CLASS_REVISION, &revision);
- if((revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV))
+ if((sis_priv->chipset_rev >= SIS635A_900_REV) ||
+ (sis_priv->chipset_rev == SIS900B_900_REV))
table_entries = 16;
else
table_entries = 8;
@@ -2127,7 +2186,7 @@
mclist && i < net_dev->mc_count;
i++, mclist = mclist->next) {
unsigned int bit_nr =
- sis900_mcast_bitnr(mclist->dmi_addr, revision);
+ sis900_mcast_bitnr(mclist->dmi_addr,
sis_priv->chipset_rev);
mc_filter[bit_nr >> 4] |= (1 << (bit_nr & 0xf));
}
}
@@ -2173,7 +2232,6 @@
long ioaddr = net_dev->base_addr;
int i = 0;
u32 status = TxRCMP | RxRCMP;
- u8 revision;
outl(0, ioaddr + ier);
outl(0, ioaddr + imr);
@@ -2186,8 +2244,8 @@
status ^= (inl(isr + ioaddr) & status);
}
- pci_read_config_byte(sis_priv->pci_dev, PCI_CLASS_REVISION, &revision);
- if( (revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV) )
+ if( (sis_priv->chipset_rev >= SIS635A_900_REV) ||
+ (sis_priv->chipset_rev == SIS900B_900_REV) )
outl(PESEL | RND_CNT, ioaddr + cfg);
else
outl(PESEL, ioaddr + cfg);
@@ -2224,7 +2282,7 @@
#ifdef CONFIG_PM
-static int sis900_suspend(struct pci_dev *pci_dev, u32 state)
+static int sis900_suspend(struct pci_dev *pci_dev, pm_message_t state)
{
struct net_device *net_dev = pci_get_drvdata(pci_dev);
long ioaddr = net_dev->base_addr;
diff -Nru a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
--- a/drivers/net/via-rhine.c 2005-03-14 23:10:04 -08:00
+++ b/drivers/net/via-rhine.c 2005-03-14 23:10:04 -08:00
@@ -390,7 +390,7 @@
#ifdef USE_MMIO
/* Registers we check that mmio and reg are the same. */
-int mmio_verify_registers[] = {
+static const int mmio_verify_registers[] = {
RxConfig, TxConfig, IntrEnable, ConfigA, ConfigB, ConfigC, ConfigD,
0
};
@@ -1197,8 +1197,10 @@
dev->name, rp->pdev->irq);
rc = alloc_ring(dev);
- if (rc)
+ if (rc) {
+ free_irq(rp->pdev->irq, dev);
return rc;
+ }
alloc_rbufs(dev);
alloc_tbufs(dev);
rhine_chip_reset(dev);
@@ -1940,7 +1942,7 @@
}
#ifdef CONFIG_PM
-static int rhine_suspend(struct pci_dev *pdev, u32 state)
+static int rhine_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct rhine_private *rp = netdev_priv(dev);
-
To unsubscribe from this list: send the line "unsubscribe bk-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
