ChangeSet 1.2231.1.222, 2005/03/28 20:18:04-08:00, [EMAIL PROTECTED]
[PATCH] dvb: dibusb: support nova-t usb ir
o added native nova-t support, since only the nova-t firmware works
with the
nova-t remote control
o added keys statically (maybe we should find something to sort this
out...
cinergyt2 is doing the same)
(Patrick Boettcher)
Signed-off-by: Johannes Stezenbach <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Linus Torvalds <[EMAIL PROTECTED]>
dvb-dibusb-core.c | 19 ++++-
dvb-dibusb-firmware.c | 4 -
dvb-dibusb-remote.c | 177 +++++++++++++++++++++++++++++++++++++++++---------
dvb-dibusb-usb.c | 12 ++-
dvb-dibusb.h | 13 +++
5 files changed, 187 insertions(+), 38 deletions(-)
diff -Nru a/drivers/media/dvb/dibusb/dvb-dibusb-core.c
b/drivers/media/dvb/dibusb/dvb-dibusb-core.c
--- a/drivers/media/dvb/dibusb/dvb-dibusb-core.c 2005-03-28 21:57:36
-08:00
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-core.c 2005-03-28 21:57:36
-08:00
@@ -42,10 +42,14 @@
module_param(pid_parse, int, 0644);
MODULE_PARM_DESC(pid_parse, "enable pid parsing (filtering) when running at
USB2.0");
-static int rc_query_interval;
+static int rc_query_interval = 100;
module_param(rc_query_interval, int, 0644);
MODULE_PARM_DESC(rc_query_interval, "interval in msecs for remote control
query (default: 100; min: 40)");
+static int rc_key_repeat_count = 2;
+module_param(rc_key_repeat_count, int, 0644);
+MODULE_PARM_DESC(rc_key_repeat_count, "how many key repeats will be dropped
before passing the key event again (default: 2)");
+
/* Vendor IDs */
#define USB_VID_ADSTECH 0x06e1
#define USB_VID_ANCHOR 0x0547
@@ -225,7 +229,7 @@
{ DIBUSB2_0,&dibusb_usb_ctrl[2],
"dvb-dibusb-6.0.0.5.fw",
0x01, 0x06,
- 3, 188*210,
+ 7, 4096,
DIBUSB_RC_NEC_PROTOCOL,
&dibusb_demod[DIBUSB_DIB3000MC],
&dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5],
@@ -246,6 +250,14 @@
&dibusb_demod[DIBUSB_DIB3000MB],
&dibusb_tuner[DIBUSB_TUNER_CABLE_THOMSON],
},
+ { NOVAT_USB2,&dibusb_usb_ctrl[2],
+ "dvb-dibusb-nova-t-1.fw",
+ 0x01, 0x06,
+ 7, 4096,
+ DIBUSB_RC_HAUPPAUGE_PROTO,
+ &dibusb_demod[DIBUSB_DIB3000MC],
+ &dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5],
+ },
};
static struct dibusb_usb_device dibusb_devices[] = {
@@ -305,7 +317,7 @@
{ NULL },
},
{ "Hauppauge WinTV NOVA-T USB2",
- &dibusb_device_classes[DIBUSB2_0],
+ &dibusb_device_classes[NOVAT_USB2],
{ &dib_table[30], NULL },
{ &dib_table[31], NULL },
},
@@ -475,6 +487,7 @@
/* store parameters to structures */
dib->rc_query_interval = rc_query_interval;
dib->pid_parse = pid_parse;
+ dib->rc_key_repeat_count = rc_key_repeat_count;
usb_set_intfdata(intf, dib);
diff -Nru a/drivers/media/dvb/dibusb/dvb-dibusb-firmware.c
b/drivers/media/dvb/dibusb/dvb-dibusb-firmware.c
--- a/drivers/media/dvb/dibusb/dvb-dibusb-firmware.c 2005-03-28 21:57:36
-08:00
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-firmware.c 2005-03-28 21:57:36
-08:00
@@ -30,11 +30,13 @@
int ret = 0,i;
if ((ret = request_firmware(&fw, dibdev->dev_cl->firmware, &udev->dev))
!= 0) {
- err("did not find a valid firmware file. (%s) "
+ err("did not find the firmware file. (%s) "
"Please see linux/Documentation/dvb/ for more details
on firmware-problems.",
dibdev->dev_cl->firmware);
return ret;
}
+
+ info("downloading firmware from file '%s'.",dibdev->dev_cl->firmware);
p = kmalloc(fw->size,GFP_KERNEL);
if (p != NULL) {
diff -Nru a/drivers/media/dvb/dibusb/dvb-dibusb-remote.c
b/drivers/media/dvb/dibusb/dvb-dibusb-remote.c
--- a/drivers/media/dvb/dibusb/dvb-dibusb-remote.c 2005-03-28 21:57:36
-08:00
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-remote.c 2005-03-28 21:57:36
-08:00
@@ -13,7 +13,7 @@
/* Table to map raw key codes to key events. This should not be hard-wired
into the kernel. */
-static const struct { u8 c0, c1, c2; uint32_t key; } rc_keys [] =
+static const struct { u8 c0, c1, c2; uint32_t key; } nec_rc_keys [] =
{
/* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */
{ 0x00, 0xff, 0x16, KEY_POWER },
@@ -83,18 +83,58 @@
{ 0x86, 0x6b, 0x1b, KEY_RIGHT },
};
-/*
- * Read the remote control and feed the appropriate event.
- * NEC protocol is used for remote controls
- */
-static int dibusb_read_remote_control(struct usb_dibusb *dib)
+/* Hauppauge NOVA-T USB2 keys */
+static const struct { u16 raw; uint32_t key; } haupp_rc_keys [] = {
+ { 0xddf, KEY_GOTO },
+ { 0xdef, KEY_POWER },
+ { 0xce7, KEY_TV },
+ { 0xcc7, KEY_VIDEO },
+ { 0xccf, KEY_AUDIO },
+ { 0xcd7, KEY_MEDIA },
+ { 0xcdf, KEY_EPG },
+ { 0xca7, KEY_UP },
+ { 0xc67, KEY_RADIO },
+ { 0xcb7, KEY_LEFT },
+ { 0xd2f, KEY_OK },
+ { 0xcbf, KEY_RIGHT },
+ { 0xcff, KEY_BACK },
+ { 0xcaf, KEY_DOWN },
+ { 0xc6f, KEY_MENU },
+ { 0xc87, KEY_VOLUMEUP },
+ { 0xc8f, KEY_VOLUMEDOWN },
+ { 0xc97, KEY_CHANNEL },
+ { 0xc7f, KEY_MUTE },
+ { 0xd07, KEY_CHANNELUP },
+ { 0xd0f, KEY_CHANNELDOWN },
+ { 0xdbf, KEY_RECORD },
+ { 0xdb7, KEY_STOP },
+ { 0xd97, KEY_REWIND },
+ { 0xdaf, KEY_PLAY },
+ { 0xda7, KEY_FASTFORWARD },
+ { 0xd27, KEY_LAST }, /* Skip backwards */
+ { 0xd87, KEY_PAUSE },
+ { 0xcf7, KEY_NEXT },
+ { 0xc07, KEY_0 },
+ { 0xc0f, KEY_1 },
+ { 0xc17, KEY_2 },
+ { 0xc1f, KEY_3 },
+ { 0xc27, KEY_4 },
+ { 0xc2f, KEY_5 },
+ { 0xc37, KEY_6 },
+ { 0xc3f, KEY_7 },
+ { 0xc47, KEY_8 },
+ { 0xc4f, KEY_9 },
+ { 0xc57, KEY_KPASTERISK },
+ { 0xc77, KEY_GRAVE }, /* # */
+ { 0xc5f, KEY_RED },
+ { 0xd77, KEY_GREEN },
+ { 0xdc7, KEY_YELLOW },
+ { 0xd4f, KEY_BLUE},
+};
+
+static int dibusb_key2event_nec(struct usb_dibusb *dib,u8 rb[5])
{
- u8 b[1] = { DIBUSB_REQ_POLL_REMOTE }, rb[5];
- int ret;
int i;
- if ((ret = dibusb_readwrite_usb(dib,b,1,rb,5)))
- return ret;
-
switch (rb[0]) {
case DIBUSB_RC_NEC_KEY_PRESSED:
/* rb[1-3] is the actual key, rb[4] is a checksum */
@@ -107,30 +147,100 @@
}
/* See if we can match the raw key code. */
- for (i = 0; i < sizeof(rc_keys)/sizeof(rc_keys[0]);
i++) {
- if (rc_keys[i].c0 == rb[1] &&
- rc_keys[i].c1 == rb[2] &&
- rc_keys[i].c2 == rb[3]) {
- dib->rc_input_event = rc_keys[i].key;
- deb_rc("Translated key 0x%04x\n",
dib->rc_input_event);
- /* Signal down and up events for this
key. */
- input_report_key(&dib->rc_input_dev,
dib->rc_input_event, 1);
- input_report_key(&dib->rc_input_dev,
dib->rc_input_event, 0);
- input_sync(&dib->rc_input_dev);
- break;
+ for (i = 0; i <
sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]); i++) {
+ if (nec_rc_keys[i].c0 == rb[1] &&
+ nec_rc_keys[i].c1 == rb[2] &&
+ nec_rc_keys[i].c2 == rb[3]) {
+
+ dib->last_event = nec_rc_keys[i].key;
+ return 1;
}
}
break;
- case DIBUSB_RC_NEC_EMPTY: /* No (more) remote control keys. */
- break;
case DIBUSB_RC_NEC_KEY_REPEATED:
/* rb[1]..rb[4] are always zero.*/
/* Repeats often seem to occur so for the moment just
ignore this. */
- deb_rc("Key repeat\n");
+ return 0;
+ case DIBUSB_RC_NEC_EMPTY: /* No (more) remote control keys. */
+ default:
+ break;
+ }
+ return -1;
+}
+
+static int dibusb_key2event_hauppauge(struct usb_dibusb *dib,u8 rb[4])
+{
+ u16 raw;
+ int i,state;
+ switch (rb[0]) {
+ case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED:
+ raw = ((rb[1] & 0x0f) << 8) | rb[2];
+
+ state = !!(rb[1] & 0x40);
+
+ deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to %04x
state: %d\n",rb[1],rb[2],rb[3],raw,state);
+ for (i = 0; i <
sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++) {
+ if (haupp_rc_keys[i].raw == raw) {
+ if (dib->last_event ==
haupp_rc_keys[i].key &&
+ dib->last_state == state) {
+ deb_rc("key repeat\n");
+ return 0;
+ } else {
+ dib->last_event =
haupp_rc_keys[i].key;
+ dib->last_state = state;
+ return 1;
+ }
+ }
+ }
+
break;
+ case DIBUSB_RC_HAUPPAUGE_KEY_EMPTY:
default:
break;
}
+ return -1;
+}
+
+/*
+ * Read the remote control and feed the appropriate event.
+ * NEC protocol is used for remote controls
+ */
+static int dibusb_read_remote_control(struct usb_dibusb *dib)
+{
+ u8 b[1] = { DIBUSB_REQ_POLL_REMOTE }, rb[5];
+ int ret,event = 0;
+
+ if ((ret = dibusb_readwrite_usb(dib,b,1,rb,5)))
+ return ret;
+
+ switch (dib->dibdev->dev_cl->remote_type) {
+ case DIBUSB_RC_NEC_PROTOCOL:
+ event = dibusb_key2event_nec(dib,rb);
+ break;
+ case DIBUSB_RC_HAUPPAUGE_PROTO:
+ event = dibusb_key2event_hauppauge(dib,rb);
+ default:
+ break;
+ }
+
+ /* key repeat */
+ if (event == 0)
+ if (++dib->repeat_key_count < dib->rc_key_repeat_count) {
+ deb_rc("key repeat dropped.
(%d)\n",dib->repeat_key_count);
+ event = -1; /* skip this key repeat */
+ }
+
+ if (event == 1 || event == 0) {
+ deb_rc("Translated key 0x%04x\n",event);
+
+ /* Signal down and up events for this key. */
+ input_report_key(&dib->rc_input_dev, dib->last_event, 1);
+ input_report_key(&dib->rc_input_dev, dib->last_event, 0);
+ input_sync(&dib->rc_input_dev);
+
+ if (event == 1)
+ dib->repeat_key_count = 0;
+ }
return 0;
}
@@ -161,12 +271,21 @@
dib->rc_input_dev.keycodemax = KEY_MAX;
dib->rc_input_dev.name = DRIVER_DESC " remote control";
- for (i=0; i<sizeof(rc_keys)/sizeof(rc_keys[0]); i++)
- set_bit(rc_keys[i].key, dib->rc_input_dev.keybit);
+ switch (dib->dibdev->dev_cl->remote_type) {
+ case DIBUSB_RC_NEC_PROTOCOL:
+ for (i=0; i<sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]);
i++)
+ set_bit(nec_rc_keys[i].key,
dib->rc_input_dev.keybit);
+ break;
+ case DIBUSB_RC_HAUPPAUGE_PROTO:
+ for (i=0;
i<sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++)
+ set_bit(haupp_rc_keys[i].key,
dib->rc_input_dev.keybit);
+ break;
+ default:
+ break;
+ }
- input_register_device(&dib->rc_input_dev);
- dib->rc_input_event = KEY_MAX;
+ input_register_device(&dib->rc_input_dev);
INIT_WORK(&dib->rc_query_work, dibusb_remote_query, dib);
diff -Nru a/drivers/media/dvb/dibusb/dvb-dibusb-usb.c
b/drivers/media/dvb/dibusb/dvb-dibusb-usb.c
--- a/drivers/media/dvb/dibusb/dvb-dibusb-usb.c 2005-03-28 21:57:36 -08:00
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-usb.c 2005-03-28 21:57:36 -08:00
@@ -117,9 +117,14 @@
u8 b[1] = { DIBUSB_IOCTL_POWER_SLEEP };
deb_info("dibusb-device is going to bed.\n");
/* workaround, something is wrong, when dibusb 1.1 device are going to
bed too late */
- if (dib->dibdev->dev_cl->id != DIBUSB1_1)
- dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1);
-
+ switch (dib->dibdev->dev_cl->id) {
+ case DIBUSB1_1:
+ case NOVAT_USB2:
+ break;
+ default:
+ dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1);
+ break;
+ }
if (dib->fe_sleep)
return dib->fe_sleep(fe);
@@ -137,6 +142,7 @@
switch (dib->dibdev->dev_cl->id) {
case DIBUSB2_0:
case DIBUSB2_0B:
+ case NOVAT_USB2:
if (onoff)
return
dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_ENABLE_STREAM,NULL,0);
else
diff -Nru a/drivers/media/dvb/dibusb/dvb-dibusb.h
b/drivers/media/dvb/dibusb/dvb-dibusb.h
--- a/drivers/media/dvb/dibusb/dvb-dibusb.h 2005-03-28 21:57:36 -08:00
+++ b/drivers/media/dvb/dibusb/dvb-dibusb.h 2005-03-28 21:57:36 -08:00
@@ -73,6 +73,7 @@
DIBUSB2_0,
UMT2_0,
DIBUSB2_0B,
+ NOVAT_USB2,
} dibusb_class_t;
typedef enum {
@@ -90,7 +91,8 @@
typedef enum {
DIBUSB_RC_NO = 0,
- DIBUSB_RC_NEC_PROTOCOL = 1,
+ DIBUSB_RC_NEC_PROTOCOL,
+ DIBUSB_RC_HAUPPAUGE_PROTO,
} dibusb_remote_t;
struct dibusb_tuner {
@@ -188,7 +190,10 @@
/* remote control */
struct input_dev rc_input_dev;
struct work_struct rc_query_work;
- int rc_input_event;
+ int last_event;
+ int last_state; /* for Hauppauge RC protocol */
+ int repeat_key_count;
+ int rc_key_repeat_count; /* module parameter */
/* module parameters */
int pid_parse;
@@ -269,6 +274,10 @@
#define DIBUSB_RC_NEC_EMPTY 0x00
#define DIBUSB_RC_NEC_KEY_PRESSED 0x01
#define DIBUSB_RC_NEC_KEY_REPEATED 0x02
+
+/* additional status values for Hauppauge Remote Control Protocol */
+#define DIBUSB_RC_HAUPPAUGE_KEY_PRESSED 0x01
+#define DIBUSB_RC_HAUPPAUGE_KEY_EMPTY 0x03
/* streaming mode:
* bulk write: 0x05 mode_byte
-
To unsubscribe from this list: send the line "unsubscribe bk-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
