tree e1c6da0f4112d30f6306054c78a912bca15e10e0
parent 7e8c9e14e8fdce0af9f5eed7ce6dd26b91fc8f4e
author David Ranson <[EMAIL PROTECTED]> Thu, 28 Jul 2005 01:43:55 -0700
committer Linus Torvalds <[EMAIL PROTECTED]> Thu, 28 Jul 2005 06:25:53 -0700

[PATCH] serial: MRi MRI-PCIDS1 dual port serial card

Add support for the MRi PCIDS1 dual port serial card.  This card is a
little controversial since it is the subject of a PCI vendor/device ID
clash.  (See
http://www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).  I have
for now just used the hex ID 0x950a.  The divisor was part calculated part
iterated, so may not be exactly correct (but works for me at all settings
between 300 - 115300 bps).

Cc: Russell King <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Linus Torvalds <[EMAIL PROTECTED]>

 drivers/serial/8250_pci.c |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+)

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -1029,6 +1029,8 @@ enum pci_board_num_t {
        pbn_b0_2_921600,
        pbn_b0_4_921600,
 
+       pbn_b0_2_1130000,
+
        pbn_b0_4_1152000,
 
        pbn_b0_bt_1_115200,
@@ -1163,6 +1165,14 @@ static struct pci_board pci_boards[] __d
                .base_baud      = 921600,
                .uart_offset    = 8,
        },
+
+       [pbn_b0_2_1130000] = {
+               .flags          = FL_BASE0,
+               .num_ports      = 2,
+               .base_baud      = 1130000,
+               .uart_offset    = 8,
+       },
+
        [pbn_b0_4_1152000] = {
                .flags          = FL_BASE0,
                .num_ports      = 4,
@@ -1988,6 +1998,16 @@ static struct pci_device_id serial_pci_t
        {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
                PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 
0,
                pbn_b0_4_1152000 },
+
+               /*
+                * The below card is a little controversial since it is the
+                * subject of a PCI vendor/device ID clash.  (See
+                * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
+                * For now just used the hex ID 0x950a.
+                */
+       {       PCI_VENDOR_ID_OXSEMI, 0x950a,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_b0_2_1130000 },
        {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
                PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b0_4_115200 },
-
To unsubscribe from this list: send the line "unsubscribe bk-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to