A workaround for this has been posted here: https://groups.google.com/g/blacktree-quicksilver/c/pvF6F7z4stw/m/IO6ulC_qrAwJ The workaround doesn't work for me quite as listed, because when I attempt to copy the "run" action, holding down command to hit command + c changes the action... but I can right-click on the "run" action for a .scpt, copy it, load a .scptd in the trigger, and then paste the run action in. Save it and it works. It would be nice to get this fixed, but there is at least a workaround.
On Saturday, June 15, 2013 at 10:40:03 PM UTC-4 Ontonator wrote: > I have notice recently that Quicksilver does not support .scptd files. It > cannot run them or use them as actions. Is there a plugin that supports > this or an update coming out? -- You received this message because you are subscribed to the Google Groups "Quicksilver" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/blacktree-quicksilver/0db5f4b8-2775-49df-8385-4c7aa055989dn%40googlegroups.com.
