#11534: libqmi-1.22.0
-------------------------+-----------------------
Reporter: bdubbs | Owner: bdubbs
Type: enhancement | Status: assigned
Priority: normal | Milestone: 8.4
Component: BOOK | Version: SVN
Severity: normal | Resolution:
Keywords: |
-------------------------+-----------------------
Comment (by bdubbs):
Overview of changes in libqmi 1.22.0
* Build now looks for the correct python provider in the system during
configure.
* New services:
* New 'QoS' (Quality of Service) service, with some minimal initial
implementation to support flow/network status querying. Additionally,
some Sierra-specific commands are also implemented that allow
querying
per-bearer statistics (e.g. if multiple dedicated and default LTE
bearers
are used).
* New request/responses/indications:
* loc: new "Register Events" request/response.
* loc: new "NMEA" indication.
* loc: new "Engine State" indication.
* loc: new "Fix Recurrence Type" indication.
* loc: new "GNSS Sv Info" indication.
* loc: new "Inject Predicted Orbits Data" request/response/indication.
* loc: new "Get Predicted Orbits Data Source"
request/response/indication.
* loc: new "Set Server" request/response/indication.
* loc: new "Get Server" request/response/indication.
* loc: new "Delete Assistance Data" request/response/indication.
* loc: new "Set Operation Mode" request/response/indication.
* loc: new "Get Operation Mode" request/response/indication.
* loc: new "Inject XTRA Data" request/response/indication.
* uim: new "Card Status" indication.
* wds: new "Get Default Profile Num" request/response.
* wds: new "Set Default Profile Num" request/response.
* wds: new Sierra-specific "Swi Create Profile Indexed"
request/response.
* New TLVs supported in existing messages:
* loc: added multiple new TLVs in the "Position Report" indication,
which
was a minimal skeleton in previous releases.
* loc: added 'Fix Recurrence Type' TLV in "Start".
* loc: added 'Minimum Interval between Position Reports' TLV in
"Start".
* nas: added 'Acquisition Order Preference' TLV in "Set System
Selection
Preference" and "Get System Selection Preference".
* nas: added 'Phy CA Agg Secondary Cells' TLV in "Get LTE Cphy CA
Info".
* wds: added 'WDS APN Disabled Flag' TLV in "Create Profile", "Modify
Profile" and "Get Profile Settings".
* wds: added 'WDS Roaming Disallowed Flag' TLV in "Create Profile",
"Modify Profile" and "Get Profile Settings".
* libqmi:
* Assume TLVs < 0x10 are mandatory by default.
* Fixed some missing QmiProtocolErrors and updated some existing ones.
* Implemented support to allow enabling QMI indications when in MBIM
mode.
* Addded missing QmiNasBandPreference and QmiDmsLteBandCapability
flags.
* Deprecate QMI_CORE_ERROR_TLV_EMPTY, as empty TLVs are allowed by the
protocol and totally valid e.g. in 0-sized string-type TLVs.
* Moved all deprecated APIs to 'qmi-compat.h' header.
* qmicli:
* New '--loc-get-position-report' command.
* New '--loc-get-gnss-sv-info' command.
* New '--loc-follow-position-report' command.
* New '--loc-follow-gnss-sv-info' command.
* New '--loc-follow-nmea' command.
* New '--loc-delete-assistance-data' command.
* New '--qos-get-flow-status' command.
* New '--qos-get-network-status' command.
* New '--qos-swi-read-data-stats' command.
* New '--qos-reset' command.
* New '--wds-create-profile' command.
* New '--wds-modify-profile' command.
* New '--wds-delete-profile' command.
* New '--wds-get-default-profile-num' command.
* New '--wds-set-default-profile-num' command.
* New '--wds-swi-create-profile-indexed' command.
* Added support to request acquisition order preference updates when
using
'--nas-set-system-selection-preference'.
* Fixed slot indices in '--uim-get-card-status'.
* Fixed '--uim-set-pin-protection', '--uim-verify-pin", "--uim-unblock-
pin",
and '--uim-change-pin', so that a dummy application identifier is
always
used.
* Updated so that all commands work even through QMI over MBIM, even if
indications are required to complete the command (e.g. most PDC and
LOC
commands).
* qmi-network:
* Avoid creating invalid --wds-start-network when APN is not set.
* Several other minor improvements and fixes.
The following features which were backported to 1.20.x releases are also
present
in libqmi 1.22.0:
* qmicli:
* Exit on --wds-start-network parse errors.
* Fix reading current technology in --wds-get-data-bearer-technology.
* qmi-firmware-update:
* Fix --ignore-version-errors.
* Fix byte counts in error message.
* libqmi-glib:
* dms: factory settings related operations since 1.0
* Avoid closing same file descriptor twice.
* Don't leak the inner MbimDevice if MBIM_QMUX_ENABLED.
--
Ticket URL: <http://wiki.linuxfromscratch.org/blfs/ticket/11534#comment:2>
BLFS Trac <http://wiki.linuxfromscratch.org/blfs>
Beyond Linux From Scratch
--
http://lists.linuxfromscratch.org/listinfo/blfs-book
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
