Alle 23:33, mercoledì 19 ottobre 2005, Ken Moffat ha scritto: > On Wed, 19 Oct 2005, sacarde wrote: > >> - which kernel version was used, > > > > 2.6.11.12 > > > >> which sound driver module, what > > > > snd_via82xx > > > >> does lspci say about your soundcard, > > > > pci bus 0x0000 cardnum 0x11 function 0x05: vendor 0x1106 device 0x3059 > > VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller > > Hmm, all the indications are that this *is* the correct driver. > > >> plus which kernel are you using in > >> your LFS system, > > > > 2.6.11.12.....I compile kernel with CDLIVE-BLFS 6.1 with config-file > > copied from distro Archie (2.6.11.12) > > Odd, if it worked there then it should work here. > > >> and what does the config (just the relevant part of > >> /proc/config.gz, for preference) say about the sound drivers ? > > > > CONFIG_SND=y > > [ snipped, nothing obviously wrong ] > > > command: dmesg | grep via > > via82xx: Assuming DXS channels with 48k fixed sample rate. > > I'm sorry, this all looks perfectly correct. On the machine I'm using > at the moment (Realtek ALC850 chip using Via 8237) the config looks > similar (different things built in/as modules, but similar selections), > except that I also selected an Intel sound driver (I got misinformed > about which driver I needed). > > I don't have that via message in my dmesg, but then I'm running 2.6.13 > on this box. > > When I use alsamixer, it shows > > Card: VIA 8237 > Chip: Realtek ALC850 rev 0 > View: Playback > Item: Master
for me is: Card: VIA 8237 Chip: C-Media Electronics CMI9761 > and I need to unmute the Master and first PCM controls (sliders 1 and > 3, from the left, starting to count at 1). I unmute slider 1 (MASTER) but is blocked to zero I unmute other and select high volume I think MASTER is blocked because command alsaconf no found my soundcard error is: No supported PnP or PCI card found so I installed alsa-driver-1.0.9rc4a (this is not included into BLFS6.1) but the result no change do you know where ALSA store soundcard database ? Can I add by hand via82xx ? > I interpreted what you wrote earlier as "the master and other volumes > are unmuted, but I cannot use the cursor to increase the volume above 0" > - was that correct ? And, just to exhaust the possibilities, muted > controls show as 'MM' and unmuted as 'OO'. > > I can remember a chip on another box (possibly via) that could *only* > play 48KHz samples, not 44.1KHz (like CD) files - the quote from your > dmesg sounds a bit like that - are you using a sound file that you know > worked when you were running the Archie distro ? yes, I try to play a lot of mp3, no sound > Sorry I'm not being much help. > > Ken I dont have /etc/asound.conf May be important ? so I surrender !!! thanyou again [EMAIL PROTECTED] -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
