Hi,
I followed the instructions for installing Xorg-7.1 in the
latest BLFS Development book.
Now, when I run "Xorg - configure", it fails with a "Fatal server error:
Caught signal 11".
Can anybody help me?
This is the Xorg.0.log file:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/Limax:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X Window System Version 7.1.0
Release Date: 22 May 2006
X Protocol Version 11, Revision 0, Release 7.1
Build Operating System: Linux 2.6.16.27 i686
Current Operating System: Linux Limax 2.6.16.27 #1 PREEMPT Mon Oct 30
15:42:06 CET 2006 i686
Build Date: 01 November 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 1 13:28:48 2006
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2530 card 1028,0145 rev 04 class 06,00,00
hdr 00
(II) PCI: 00:01:0: chip 8086,2532 card 0000,0000 rev 04 class 06,04,00
hdr 01
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 04 class 06,04,00
hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 04 class 06,01,00
hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 1028,0145 rev 04 class 01,01,80
hdr 00
(II) PCI: 00:1f:3: chip 8086,2443 card 1028,0145 rev 04 class 0c,05,00
hdr 00
(II) PCI: 01:00:0: chip 1002,4e45 card 1002,3002 rev 00 class 03,00,00
hdr 80
(II) PCI: 01:00:1: chip 1002,4e65 card 1002,3003 rev 00 class 03,80,00
hdr 00
(II) PCI: 02:01:0: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00
hdr 80
(II) PCI: 02:01:1: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00
hdr 80
(II) PCI: 02:01:2: chip 1106,3104 card 0925,1234 rev 51 class 0c,03,20
hdr 80
(II) PCI: 02:02:0: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00
hdr 80
(II) PCI: 02:02:1: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00
hdr 80
(II) PCI: 02:02:2: chip 1106,3104 card 0925,1234 rev 51 class 0c,03,20
hdr 80
(II) PCI: 02:07:0: chip 104c,8020 card 1028,8010 rev 00 class 0c,00,10
hdr 00
(II) PCI: 02:08:0: chip 100b,0020 card 1385,f311 rev 00 class 02,00,00
hdr 00
(II) PCI: 02:09:0: chip 1102,0006 card 1102,1003 rev 00 class 04,01,00
hdr 80
(II) PCI: 02:09:1: chip 1102,7004 card 1102,1003 rev 00 class 09,80,00
hdr 80
(II) PCI: 02:0c:0: chip 8086,1229 card 1028,0145 rev 10 class 02,00,00
hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xff800000 - 0xff9fffff (0x200000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe8000000 - 0xf7ffffff (0x10000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is
cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xff600000 - 0xff7fffff (0x200000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x30000000 - 0x300fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro]
rev 0, Mem @ 0xf0000000/27, 0xff8f0000/16, I/O @ 0xec00/8, BIOS @
0x80000000/17
(--) PCI: (1:0:1) ATI Technologies Inc Radeon R300 [Radeon 9500 Pro]
(Secondary) rev 0, Mem @ 0xe8000000/27, 0xff8e0000/16
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
Backtrace:
0: Xorg(xf86SigHandler+0xa2) [0x80c70e2]
1: [0xffffe420]
2: Xorg(xf86DriverlistFromCompile+0x38) [0x80be618]
3: Xorg(DoConfigure+0x1c) [0x80b7dbc]
4: Xorg(InitOutput+0x655) [0x80a1355]
5: Xorg(main+0x293) [0x806e2c3]
6: /lib/libc.so.6(__libc_start_main+0xd0) [0xb7d13e40]
7: Xorg(FontFileCompleteXLFD+0x99) [0x806da11]
Fatal server error:
Caught signal 11. Server aborting
Max
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
