Hi
I built systemd svn all built ok boots ok, I cant get wireless to work
bcm4311 which uses b43 drivers extracted with b43 fwcutter, followed
this http://linuxwireless.org/en/users/Drivers/b43/ ,As i have done before.
I have tried using kernel 3.19 then tried 3.19.3 then 4.0-rc6.
I went back to a 3.16.1, which is running an earlier lfs same machine
wifi works, And it works the new build.
I built all kernels with the same config file, even rebuilt 3.16.1 again
(worked wireless)
dmesg
1.554475] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.557067] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.559776] e1000: Intel(R) PRO/1000 Network Driver - version
7.3.21-k8-NAPI
[ 1.562513] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.565344] sky2: driver version 1.30
[ 1.568253] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[ 1.586099] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8
[ 1.588948] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision
2, Version 0
[ 1.598187] Broadcom 43xx driver loaded [ Features: PNL ]
[ 1.601111] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed
with error -2
[ 1.602164] yenta_cardbus 0000:03:01.0: enabling device (0000 -> 0003)
[ 1.602546] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0206]
[ 1.602577] yenta_cardbus 0000:03:01.0: O2: enabling read
prefetch/write burst. If you experience problems or performance issues,
use the yenta_socket parameter 'o2_speedup=off'
[ 1.616606] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed
with error -2
[ 1.619996] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw
failed with error -2
[ 1.623325] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw
failed with error -2
[ 1.626696] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 1.630132] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
[ 1.633531] b43-phy0 ERROR: You must go to
http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and
download the correct firmware for this driver version. Please carefully
read all instructions on this website.
Yes /lib/firmware/b43/ucode5.fw exists.
I dont change anything in machine or OS between kernel builds
--
http://lists.linuxfromscratch.org/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
